User manual UNIDEN EXR2460

[. . . ] OF YOUR OWNER'S MANUAL CONTENTS Introduction. 4 · Installing the Handset Battery Pack . 11 · Cleaning the Battery Contacts . 12 · Setting the Pulse/Tone Switch. [. . . ] Use the < and > keys to move the cursor to the desired location, and enter the name. The following screen appears, and a cursor flashes indicating that the display is ready for the number to be edited. Store Number 817 555 1212 8) Enter the phone number with the number keypad (direct entry) or the : and ; keys. 18 9) Press select. The handset beeps and displays a confirmation screen. For example, if you store a name and number into memory location number one, then the handset shows Memory 1 Stored. Memory 1 Stored 10)The display then returns to the Memory Store screen. You may select another number to edit (return to step 3) or you may press memory to return to standby. ERASING A NUMBER FROM MEMORY Use these steps to erase a programmed number from memory. Once a number is erased, that memory location may be programmed with a new number. 2) Press and hold memory until the confirmation tone sounds. The handset shows the Memory Store screen with any saved numbers displayed. Memory Store 1> SMITH JOHN 2 UNIDEN NOTE If you select Go Back at any time, no changes are made and the handset shows the Memory Store screen. 3) Use the : and ; keys or number keypad to select the memory location you would like to delete. The < and > keys toggle between the names display and the numbers display. The following screen appears with the memory location number that you have selected in the display. 5) Use the ; key to move the > cursor down to the Delete Memory command. The following confirmation screen appears. > Edit Memory 1 Delete Memory 1 Go Back Edit Memory 1 > Delete Memory 1 Go Back USING NOTE If you select No, no changes are made and the handset shows the Memory Store screen. YOUR Delete Memory?Yes > No PHONE 7) Use the : key to move the > cursor to the Yes command. 19 8) Press select. There is a confirmation tone, and the handset displays Memory 1 Deleted. Memory 1 Deleted 9) The display then returns to the Memory Store screen. You may select another number to delete (return to step 3) or you may press memory to return to standby. HINT Use the < and > keys to toggle between the names and the numbers displayed in memory. USING MEMORY DIALING Follow the steps below to dial a number using a programmed memory location. The handset displays your programmed memory locations. 1 > SMITH JOHN 2 Uniden 3 Grandma 2) Use the : and ; keys or the number keypad to select the memory location you would like to dial. 3) Press talk and the number is dialed. 1 SMITH JOHN 2 > Uniden 3 Grandma NOTE When the handset is removed from the base, press talk, then memory on the handset keypad before selecting the memory location TRAVELING OUT-OF-RANGE As you begin to move too far from your base unit, you will first hear a clicking sound. As you travel further out-of-range, the voice transmission will begin to break up. If you pass the range limits of the base unit, your call will terminate. 20 USING CALLER ID You must subscribe to Caller ID from your phone company in order to use this feature. w Setting up Caller ID options There are three Caller ID setup options available; they are Autotalk, CIDCW, and Area Code. AutoTalk allows you to answer the phone without pressing the talk button. If the phone rings when Autotalk is on, simply remove the handset from the cradle and the phone automatically answers the call. If the phone rings when Autotalk is off, you must press talk to answer the call. [. . . ] The redialed number can be up to 32 digits long. To call the last number dialed from the handset, press talk, then press redial. If any key is pressed before redial, the last number will not redial. USING THE TONE FEATURE If you are dialing in the pulse mode and need to enter tone digits, press tone to enter the digits. Once the call has ended, the tone mode is canceled and pulse dialing resumes. USING YOUR NOTE The tone feature applies only when the base unit is set to pulse. PHONE 25 USING THE PAGE FEATURE To locate the handset (while it's off the base), press page on the base. To beep the handset for 5 seconds, press page on the base, and the handset displays paging. [. . . ]