User manual UNIDEN EXS9600

[. . . ] Color profile: Disabled Composite Default screen OF YOUR OWNERS MANUAL CONTENTS Introduction. 4 Installing the Handset Battery Pack . 12 Adjusting the Handset Volume Controls . 29 CONTENTS C:\LaDonna\Exs9600\EXS9600. vp Tue Dec 01 11:27:58 1998 Fold out the back cover of this owners manual to use the handy Controls and Functions page for reference. Color profile: Disabled Composite Default screen INTRODUCTION INTRODUCTION TO YOUR NEW PHONE Introduction WELCOME Congratulations on your purchase of the Uniden EXS9600 cordless telephone. [. . . ] It simply allows you to display a dash. 8) Enter the phone number with the number keypad (direct entry) or the : and ; keys. Use the : and ; keys to enter symbols, such as dashes. Use the < and > keys to move the cursor to the desired location, and enter the number. 18 C:\LaDonna\Exs9600\EXS9600. vp Tue Dec 01 11:29:00 1998 Color profile: Disabled Composite Default screen 8) Press select. The handset beeps and displays a confirmation screen. For example, if you store a name and number into memory location number one, then the handset shows Memory 1 Stored. Memory 1 Stored 9) The display then returns to the Memory Store screen. You may select another number to edit (return to step 3) or you may press memory to return to standby. ERASING A NUMBER FROM MEMORY Use these steps to erase a programmed number from memory. Once a number is erased, that memory location may be programmed with a new number. 2) Press and hold memory for two seconds. The handset shows the Memory Store screen with any saved numbers displayed. Memory Store 1> KAYSIE SCHLITZ 2 UNIDEN NOTE If you select Go Back at any time, no changes are made and the handset shows the Memory Store screen. 3) Use the : and ; keys or number keypad to select the memory location you would like to delete. The < and > keys toggle between the names display and the numbers display. The following screen appears with the memory location number that you have selected in the display. 5) Use the ; key to move the > cursor down to the Delete Memory command. > Edit Memory 1 Delete Memory 1 Go Back Edit Memory 1 > Delete Memory 1 Go Back USING NOTE If you select No, no changes are made and the handset shows the Memory Store screen. 6) Press select. The following confirmation screen appears. Delete Memory?Yes > No YOUR 7) Use the : key to move the > cursor to the Yes command. PHONE 19 C:\LaDonna\Exs9600\EXS9600. vp Tue Dec 01 11:29:03 1998 Color profile: Disabled Composite Default screen 8) Press select. There is a confirmation tone, and the handset displays Memory 1 Deleted. Memory 1 Deleted 9) The display then returns to the Memory Store screen. You may select another number to delete (return to step 3) or you may press memory to return to standby. HINT Use the < and > keys to toggle between the names and the numbers displayed in memory. USING MEMORY DIALING Follow the steps below to dial a number using a programmed memory location. The handset displays your programmed memory locations. 1 > KAYSIE SCHLITZ 2 Uniden 3 Grandma 2) Use the : and ; keys or the number keypad to select the memory location you would like to dial. 3) Press talk and the number dials. 1 KAYSIE SCHLITZ 2 > Uniden 3 Grandma NOTE When the handset is removed from the base, press talk then memory on the handset keypad before selecting the memory location. TRAVELING OUT-OF-RANGE As you begin to move too far from your base unit, you will first hear a clicking sound. As you travel further out-of-range, the voice transmission will begin to break up. If you pass the range limits of the base unit, your call will terminate. 20 C:\LaDonna\Exs9600\EXS9600. vp Tue Dec 01 11:29:05 1998 Color profile: Disabled Composite Default screen USING CALLER ID You must subscribe to Caller ID from your phone company in order to use this feature. w Setting up Caller ID options There are three Caller ID setup options available; they are Autotalk, CIDCW, and Area Code. AutoTalk allows you to answer the phone without pressing the talk button. If the phone rings when Autotalk is on, simply remove the handset from the cradle and the phone automatically answers the call. [. . . ] 1) Press call id, and the Caller ID summary screen appears. The screen shows the number of new messages and total messages. New : 01 Total : 02 NOTE If you select No, then the Caller ID screen returns. 2) Press delete, and the following screen appears. Delete All?Yes > No 3) Use the : key to move the cursor to Yes, then press select or delete. 24 C:\LaDonna\Exs9600\EXS9600. vp Tue Dec 01 11:29:13 1998 Color profile: Disabled Composite Default screen 4) A confirmation tone sounds, and the following screen appears. Total:00 5) Press call id to return to standby. USING REDIAL The redial key redials the last number dialed. The redialed number can be up to 32 digits long. USING THE TONE FEATURE If you are dialing in the pulse mode and need to enter tone digits, press tone to enter the digits. [. . . ]