User manual UNIDEN EXS9650

[. . . ] THE EXS 9650 SPREAD SPE CTRUM OWNER'S MANUAL Digital Spread Spectrum provides the longest range, the clearest sound and the best privacy. ROLS AND FUNCTIONS CONTENTS Controls and Functions . . Inside Front Cover Introduction to Your New Phone . . 2 Fold out the front cover of this owner's manual to use the handy CONTROLS AND FUNCTIONS page for reference. . 3 Introductionxx Installing Your New Phone . [. . . ] To call the last number dialed from the handset, press line 1, then press redial. or Press redial, then press line 1. If any key is pressed before redial, the last number will not redial. To call the last number dialed from the base, press line 1, then press redial/p. The EXS 9650 has two independent Last Number Redial memories, one in the handset, the other in the base. If any key is pressed before redial/p, the last number will not redial. 19 PLACING A CALL ON HOLD Use either the keypad on the handset or the keypad on the base. To place line 1 on hold at the base, press hold. The line 1 LED turns from green to red. Do not use the base and the handset keypads at the same time to place a call on hold. 2. To place line 1 on hold at the handset, press hold/p. The following screen appears: (Hold) Line 1 3. To pick up the call that is holding, press line 1 on the base or handset. USING THE MUTE FEATURE You can mute your conversation from the base. This prevents the party you are speaking to from hearing what you, or someone else in the room, is saying. For example, to use this privacy feature while using line 1. Do not press line 1 to take the phone off mute or you will disconnect the call. 1. You can hear the party on line 1, but they cannot hear you. When you are ready to continue your conversation with the party on line 1, press mute again. The line 1 LED changes to green. 20 USING THE PAGE FEATURE To locate the handset when it is off the base, press page/int'com on the base. The handset beeps for 60 seconds. The following screen appears: Paging To cancel the page, press page/int'com on the base again. Press int'com on the handset to connect to the base. Press int'com again on either the handset or the base to return to standby. 21 2-LINE OPERATION The handset and the base can be used on separate telephone lines at the same time. For example, if the handset is on a call with line 1, you can make, or receive calls, at the base on line 2. The line 1 LED on the base blinks green to indicate line 1 is In Use at the handset. When line 1 is In Use at the base the LCD screen displays the following: (Base) Line 1 M Extension In Use The Extension In Use feature prevents you from accidentally interrupting a call. When you attempt to make a call, the EXS 9650 informs you if a line is currently in use. If you attempt to make a call and another phone is In Use on line 1, the handset LCD displays "In Use". (The line 1 LED at the base blinks. ) If you press line 1, you will hear a beep. If you want to join a conversation, press the line button twice which is in use. (The second press should be while you hear a beep. ) 22 3-WAY CONFERENCING This feature lets you add a third party to your conversation from either the handset or the base. The Flash feature does not function when the phone is in Conference mode. For example, to add a party to the current call on line 1 at the base: 1. The line 1 LED turns from green to red. 2. Dial the number of the person you want to add to the conversation. [. . . ] Enter the memory location number (0-9), to dial the number. 35 YOUR NEW PHONE TROUBLESHOOTING QUICK REFERENCE CHART If your phone is not performing to your expectations, please try these simple steps before calling Uniden customer service at (800) 297-1023. PROBLEM The charge light won't come on when the handset is placed in the base. G SUGGESTION Make sure the AC adapter is plugged into the base and wall outlet. Make sure the handset is properly seated in the base. Make sure the charging contacts on the handset and base are clean. [. . . ]