User manual UNIDEN EXS9800

[. . . ] CONTROLS AND FUNCTIONS At Uniden, we'll take care of you! If you need any assistance with this product, please call our Customer Hotline at 1-800-297-1023 PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE. Our Uniden representatives will be happy to help you with any matters regarding the operation of this unit, available accessories, or any other related matters. Introduction CONTENTS Controls And Functions . . 6 Installing the Handset Battery Pack . . 30 Setting Up the Integrated Answering Device . . 33 Turning the Answering System On and Off . [. . . ] This option is useful for screening calls. CIDCW (Caller ID with Call Waiting) performs the same as regular Caller ID on a call waiting number. You must subscribe to CIDCW from your phone company to use this feature. The Area Code feature is used when storing or calling numbers from Caller ID memory. All numbers with this area code are dialed directly without the area code. If you are programming numbers within your area code that require all ten digits to be dialed, it is recommended that you do not program this feature. You may use the < and > keys to toggle between numbers when programming the area code. 26 To change your Caller ID options: 1. Press and hold setup for two seconds. The following screen appears . 1>Auto Talk:Off 2 CIDCW :On 3 Area Code: 2. Use the v and w keys to move the cursor to the selection that you would like to change. To turn AutoTalk and CIDCW On or Off, press the select key. Then, use the number keypad to enter the area code. After you finish your selections, press setup. The status LED flashes, indicating that your setup changes are now effective. w Screening your calls Caller ID allows you to review caller 12/21 12:30P 03 information before answering your Schlitz Maren 817-555-1212 phone. At the beginning of the second ring, the display shows the date, time, call count, name, and phone number of the caller. If your Caller ID service is number only, the name does not appear on the second line. If a name or number is not available, the display shows a message such as Incomplete Data, Private Number, Private Name, etc. 27 w Reviewing Caller ID name/numbers To review your Caller ID name/numbers, follow the steps below: 1. Press call id. The following screen appears: New : 01 Total : 15 2. Press w to scan through the name/numbers. The most recent name/number appears first, with the date, time, call count, name, and phone number. Once you have reviewed your oldest name/number, the following screen appears. Press memory to return to Standby. 12/21 12:30P 03 Schlitz Maren 817-555-1212 End Once you have viewed all of your Caller ID name/ numbers and reach End, the message list does not cycle back to the beginning. You must press v to view your previous name/numbers. 28 w Calling a Caller ID name/number 1. Press call id. The Caller ID summary screen shows the number of new callers and total number of calls. New : 01 Total : 15 2. Press v to scan backwards through the list. 3. [. . . ] Press # then * while the system announces the time and date. You will hear sounds in the room where your base unit is installed. After 15 seconds, the answering system returns to the Command Waiting mode. Press # then another remote function. The answering system automatically returns to Standby. * to monitor the room for another 15 seconds. [. . . ]