User manual UNIDEN EXS9950

[. . . ] Introduction TO YOUR NEW PHONE Thank you for choosing the Uniden EXS 9950 cordless telephone. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 900 MHz Spread Spectrum technology. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. INTRODUCTION Features · 900 MHz Spread Spectrum Technology · Stand Alone Telephone Answering Device (STAD) · 20 Enhanced Memory Dial Location · 4 One-touch Memory Locations · 32 Digit Redial · 2nd Battery Capability · Flash and Pause · Redial · Pulse / Tone Dialing · Page · 4 Hour Talk Time · 7 Day Standby Battery Time · Handset Earpiece and Ringer Volume Control · Hearing Aid Compatible Digital Spread Spectrum Technology utilizes a "wider frequency band" vs. a "single narrow band" used in standard digital transmissions. [. . . ] or repeat 4 5 6 23 Press clock again to end the time/day setting. The EXS 9950 announces the time that you have set. Setting your greeting When you receive a call, the answering system automatically plays either a preset message or your own greeting. ª Preset Message The following message is prerecorded: "Hello, no one is available to take your call. Please leave a message after the tone. " ª Recording your personal outgoing message (Greeting) 1 You can record a greeting up to 30 second. Press and hold greeting until you hear a long tone. Start recording your message immediately after you hear the long tone end. When you finish recording your message, press greeting or play/stop . A long tone sounds and your message plays back on the phone. backupopen battery 2 Stand within 12 inches in front of the microphone and speak clearly when recording your outgoing message. ª Choosing between the two outgoing messages 1 2 backupopen battery Press greeting to play the outgoing message. Press greeting again while the message is played. This switches between the two options. 24 Selecting the message record time You can set your answering system to record messages up to one or four minutes long. One minute option: move the REC TIME switch to 1. Four minutes option: move the REC TIME switch to 4. backupopen battery REC TIME ANN/4/1 ª Announce only feature: The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position. The message counter LED displays " " when system is on standby. Prerecorded outgoing message for Announce only feature is: "Hello, no one is available to take your call. " Selecting a PIN code To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code (00-99). To select a PIN, perform the following steps. 1 2 Press skip or repeat multiple times to scroll through numbers on the display. backupopen battery On the base, press and hold pin button until a tone sounds and the LED displays . To set the first number, press skip or repeat to scroll from 0 to 9. When the desired number appears in the display, press pin . To set the second number, press skip or repeat to scroll from 0 to 9. When the desired number appears in the display, press pin . This selects the second number and then the entered number is announced. skip/ 3 25 Setting ring time switch The ring time/toll saver switch allows you to set the number of rings the caller hears before the answering system plays your outgoing message. You can set RING TIME the switch to answer after two 2/4/TS rings or after four rings. Once the greeting has started, you can stop it when you pick up the call at the handset or base. backupopen battery If you answer at another phone extension and the greeting has started, you cannot stop the message. Wait until your greeting is complete before starting your conversation. [. . . ] · Check both ends of the base unit telephone line cord. · Make sure the AC adapter is plugged into the base unit and wall outlet. · Disconnect the AC adapter for a few minutes, then reconnect it. Charge the battery on the base unit for more than 17 hours. [. . . ]