User manual UNIDEN EXS9965

[. . . ] SPREAD SPE CTRUM OWNER'S MANUAL Digital Spread Spectrum provides the longest range, the clearest sound and the best privacy. CONTROLS AND FUNCTIONS CONTENTS Controls and Functions . . Inside Front Cover Introduction to Your New Phone . . 2 Installing and Adjusting Your Phone . . 6 Installing the Handset Battery Pack . [. . . ] This prevents the party you are speaking to from hearing what you, or someone else in the room, is saying. For example, to use this privacy feature while using line 1. You can hear the party on line 1, but they cannot hear you. When you are ready to continue your conversation with the party on line 1, press mute or line 1 again. The line 1 LED changes to green. USING THE PAGE FEATURE To locate the handset when it is off the on the base. base, press The handset beeps for 60 seconds. The following screen appears: Paging Press on the handset to connect to the base. Press again on the base or on the handset to return to standby. 20 2-LINE OPERATION The handset and the base can be used on separate telephone lines at the same time. For example, if the handset is on a call with line 1, you can make, or receive calls, at the base on line 2. The line 1 LED on the base blinks green to indicate line 1 is In Use at the handset. When line 1 is In Use at the base the LCD screen displays the following: (Base) Line 1 Extension In Use The Extension In Use feature prevents you from accidentally interrupting a call. When you attempt to make a call, the EXS 9965 informs you if a line is currently In Use. If another phone is In Use on line 1, the handset LCD displays "In Use". (The line 1 LED at the base blinks. ) If you press line 1, you will hear a beep. If you want to join a conversation on an extension currently In Use, press the corresponding line key twice. 21 3-WAY CONFERENCING This feature lets you add a third party to your conversation from either the handset or the base. The Flash feature does not function when the phone is in Conference mode. For example, to add a party to the current call on line 1 at the base: 1. The line 1 LED turns from green to red. 2. Dial the number of the person you want to add to the conversation. When the person answers, you can speak privately before bringing the original caller back on the line. Press the conference button to bring the original call back on line. If the third person's number is busy or doesn't answer, press line 2 to hang up. Return to the original call by pressing line 1. To remove either caller from your conversation, ask one of the parties to hang up. Press the corresponding line button to end the call. Follow steps 1-5 to conference using the handset. When you return the handset to the base, all calls are disconnected. [. . . ] Make sure the handset is properly seated in the base. Make sure the charging contacts on the handset and base are clean. Make sure that the base antenna is in a vertical position. Move the handset and/or base to a different location away from metal objects or appliances and try again. [. . . ]