User manual UNIDEN TRU246

[. . . ] OWNER'S MANUAL TRU246 CONTENTS Introduction / Features inside front cover Controls and Functions . 4 Step 1: Checking the package contents . 11 Adjusting the ringer and earpiece volume . 18 Telephone Features Memory dialing Storing phone numbers and names . [. . . ] The cursor flashes indicating that the display is ready for the number to be edited. TELEPHONE FEATURES [ 23 ] 7 Use the number keypad, or to edit the phone number. The phone number cannot exceed 20 digits. (See page 20. ) If you don't want to change the phone number, skip this step. The handset beeps and displays the confirmation screen. For example, if you store a name and number into memory location number 01, the display shows "Memory01 stored". After about 2 seconds, "Memory Store" is displayed. 9 Press to return to standby mode. Display a Programmed Number Use and to toggle between the names display and the numbers display. Program name Program number · When the stored phone number has 14 or more digits, "\ " is displayed next to the 12th digit. Press to see the extra digits and to return. [ 24 ] TELEPHONE FEATURES ERASING A STORED NAME AND PHONE NUMBER 1 Press and hold until "Memory Store" is displayed. 2 Press and or enter a two-digit number (01 - 20) to select the memory location you would like to edit. The following screen appears with the memory location number that you have selected in the display. 4 Press to move the cursor down to the "Delete Memory" command line. 5 Press . The following confirmation screen appears. 6 Press to move the cursor to "Yes". There is a confirmation tone and the entry is deleted. 8 After a few seconds the display returns to the "Memory Store" screen. You may select another number to delete (return to step 2) or press to return to standby. TELEPHONE FEATURES [ 25 ] PAGING To locate the handset 1 Press on the base. By holding for more than 2 seconds, the handset beeps for 60 seconds. 2 The handset beeps for 5 seconds. The following screen appears; 3 Press any key on the handset to end. When an incoming call is received during paging, paging is canceled and the telephone is switched to the incoming call. If you press during paging, the handset will be placed in off-hook (talk) mode. [ 26 ] TELEPHONE FEATURES CALLER ID FEATURES CALLER ID You must subscribe to Caller ID service to use this feature. When the telephone rings, the Caller ID feature allows you to view the caller's name and phone number on the display before you answer the phone. The handset displays the phone number of the incoming call, the name, time, and the number of calls. Additionally, you can dial the displayed number and store the information for memory dialing. Setting Caller ID options There are three Caller ID setup options available; they are AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code. [. . . ] · Make sure that the base unit antenna is in a vertical position. · Move the handset and or base unit to a different location away from metal objects or appliances and try again. · Make sure that you are not too far from the base. · Check both ends of the base unit telephone line cord. [. . . ]