User manual UNIDEN XCA555

[. . . ] Contents Important Safety Instructions . 14 Installing the Handset Battery Pack . 16 Setting the Handset Listening Volume . 16 Setting the Base Ringer Volume (XCA555 Only). [. . . ] The status LED will blink, indicating the Digital Security Code is set again. XCA550/55 17 Using Your Phone Making and Receiving Calls The following features of the XCA550/55 phones are different depending on the Handset's location when you make or receive a call. Handset On Base Answer Call Make Call Handset Off Base Changing Channels Changing Channels, Flash, and Page/Find To change channels or access call waiting while the phone is in use, or to use the one-way page to locate the Handset, follow these steps: Press These Keys Press C. Note: Change channels to help eliminate background noise. You Will Hear A click similar to when F is pressed. There may be a brief pause as your phone searches for a clear channel. A click, a short pause, then the caller (if you were on a call). -- OR -- Pick up Handset. 3) Press F. Hang up Flash Redial If the call waiting tone sounds, press F to accept the waiting call -- OR -- Note: Sometimes when you press T to hang up the phone, you may get an error tone and the phone will not disconnect. If this happens, place the Handset on the Base Unit or press T again while holding the Handset close to the Base Unit. If you have finished a call and want to make another call, press F to hang up and get a dial tone. Page/Find Press page/find on the Base Unit to locate the Handset A click, and then a dial tone so you can make a different call. The Handset will beep more than 5 times. 18 XCA550/55 Programming Your Phone All programming functions must be completed when your phone is in standby because programming keys will not work while you are on the phone. Storing a Mixed Number If your phone is set up for Pulse dialing, you can store a mixed mode number so that you can easily access long distance services. Use these keys to store a mixed mode number in memory. Storing a Number in Memory Use these keys to store a number in memory. Note: An error tone will sound and the programming procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step. Note: An error tone will sound and the programming procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step. 1. Enter the number you want to store (up to 16 digits). If a pause is needed during dialing to access a long distance service, press P. 1. Enter the number to be dialed in pulse mode. 4. 5551212 5551212 9 P 5522 511 O on the Handset. Note: The P button counts as one digit. Pressing Pmore than once increases the length of the pause between numbers. 5. A tone indicates that the number is stored. 5. Enter the number to be dialed in tone mode. If a pause is needed during dialing to access a long distance service, press P. 30 30 P30 30 Note: The P button counts as one digit. Pressing P more than once increases the length of the pause between numbers. 7. A tone indicates that the number is stored. XCA550/55 19 Dialing a Stored Number To dial a number previously stored in memory, follow these steps: 1. Remove the Handset from the Base Unit. Erasing a Stored Number To erase a number previously stored in a memory location (0-9), follow these steps: 1. Remove the Handset from the Base Unit. 2. [. . . ] To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium Battery Warning H This equipment contains a Rechargeable Nickel-Cadmium Battery. H Cadmium is a chemical known to the State of California to cause cancer. H The Rechargeable Nickel-Cadmium Battery contained in this equipment may explode if disposed of in a fire. H Do not short-circuit the battery. [. . . ]