User manual UNIDEN XCA650

[. . . ] Contents Answering Device Remote Keys . 21 Installing the Handset Battery Pack . 31 Changing Channels, Flash, and Page/Find . 41 1 Turning the Answering System On/Off . [. . . ] By simply pressing one button, you can review all of the function keys on the Handset. You won't have to worry about finding a quick reference card because help is really at your fingertips. Your XCA650 is an advanced, integrated system which offers you maximum flexibility, but please read through the sections that explain all of the features before using your Answering System. 40 Answering System Setup Turning the Answering System On/Off Handset Operation 1. To turn the Answering System on, press R . The talk/batt low LED lights green. The current Time and Day Stamp and number of new messages recorded is announced in the Handset receiver. 2. Press 5. You will hear a tone in the Handset followed by the announcement: "Answering System on. " 3. Press R Standby. again to return to The talk/batt low LED turns off. 41 4. To turn the Answering System off, press R . The talk/batt low LED lights green. The current Time and Day Stamp and number of messages recorded is announced on the Handset receiver. 5. Press 5. You will hear a tone in the Handset followed by the announcement: "Answering System off. " 6. Press R Standby. again to return to The talk/batt low LED turns off. 42 Base Operation 1. To turn the Answering System on, press answer. A tone sounds, and the current outgoing message plays on the Base Unit speaker. A second tone sounds to indicate the unit is ready to answer calls, and the Message Counter LED turns on. 2. To turn the Answering System off, press answer again. A tone sounds and the Message Counter LED turns off. Setting the Clock The clock in your XCA650 Answering System starts when power is applied to the Base Unit. Follow these steps to set the clock to the correct time. 1. Press R on the Handset. The talk/batt low LED lights green. 43 2. Press * . Then enter the number which corresponds to the day. 3. Enter the two-digit number for the hour (01-12) and the minute (00-59). To set PM, press #. 4. Note: A beep indicates the new time is programmed, and the new Time and Day Stamp is announced in the Handset receiver. 5. to return to For example, to set Tuesday at 3:20 PM, press R followed by these keys. *30320# Note: Remember to press R again to return to Standby. 44 Reviewing Time and Day Stamp Handset Operation 1. Press R to hear the current Time and Day Stamp. The Handset beeps and the Time and Day Stamp is announced, followed by the total number of messages stored in memory. The talk/batt low LED lights green. 2. Press 6 to replay the current Time and Day Stamp while using the remote keys . The Handset beeps and the Time and Day Stamp is replayed. 3. Press R Standby. again to return to 45 Base Operation 1. Press 6. The speaker beeps, and the Time and Day Stamp is announced. Setting Your Outgoing Message (OGM) When you receive a call, the Answering System answers and automatically plays either a preset message or your personal Outgoing Message. Preset Messages The XCA650 has two messages programmed in its memory. If the REC TIME/ANN/4/1 switch is in either the four or one position, the first preset message below plays. Incoming messages are limited to four or one minute respectively. If the switch is set in the left position, (i. e. , the "Announce Only" position) the second message below plays, and no incoming messages are recorded. Please leave your message after the tone. No one is available to take your call. Note: If the REC TIME/ANN/4/1 switch is in the "Announce Only" position, the Message Counter LED displays an A when the system is in Standby. 46 Recording Your Personal OGM Handset Operation 1. Press R . The talk/batt low LED lights green. 2. Press 7. [. . . ] Phone ® talk talk batt low remote tone ? mem ringer chan flash pause redial Operating Guide UDZZ01369ZZ PRECAUTIONS Before you read anything else, please observe the following: WARNING! Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. RECHARGEABLE NICKEL-CADMIUM BATTERY WARNING This equipment contains a Rechargeable Nickel-Cadmium Battery. Cadmium is a chemical known to the State of California to cause cancer. The Rechargeable Nickel-Cadmium Battery contained in this equipment may explode if disposed of in a fire. [. . . ]