User manual UNIVERSAL REMOTE CONTROL ONE FOR ALL 1030

[. . . ] "Universal TV Remote" Overview: Thank you for purchasing the One For All® 1 Device universal remote control. Before you can use your new remote control, you will need to program it. [. . . ] Match the batteries to the + and - marks inside the battery case, then insert the batteries. Step 2: Looking Up Your TV Code Step 3: Setting Up Your TV Turn on your TV. Press and hold SETUP until the One For All® 1 Device's red light blinks twice. Release SETUP. Device 1 Power Key Setup Key 1 2 Feature and Function Red Light (LED) Mute Key 1 2 Look at your TV to find the brand name and write it in the space below: 1 2 SETUP _____________________ Find your TV brand on the RCA 3124 Sony 1111 reverse side of these instructions. The most popular codes are listed first. Write your codes here: Set-Up Codes How to Enter Codes 3 Channel & Volume Keys Using the example shown on the right, enter the first four-digit code you wrote down. (See "Looking Up Your TV Code". ) If you put in the code correctly, the red light will blink twice. If your TV Press code is: 3 4 POWER Press the battery cover back into place and replace the screw. You will need one of these codes to program your One For All ® 1 Device remote control. 3 1 2 4 3 CH+ 1 VOL VOL 2 CH_ 4 4 POWER Even if your batteries die, the One For All® 1 Device built in memory back-up will save your programmed setup codes. The One For All® 1 Device will also retain the memory for another 10 minutes once you have removed the batteries to replace them. Aim the One For All® 1 Device at your TV and press POWER. If it doesn't, repeat Steps 2-4, trying each code listed for your brand until you find the one that operates your TV. Troubleshooting If you cannot get the One For All ® 1 Device to operate your TV: s Try all of the codes listed for the brand of your TV in the Set-Up Codes section. If your TV responds to some of the commands but causes the wrong results, try all of the codes listed for your brand. Many TV's use similar remote control codes. Make sure you are within 15 feet of your TV when using your remote control. [. . . ] No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics Inc. One For All ® is designed for compatibility in North America excluding Mexico. URC-1030 08/01 [. . . ]