User manual UNIVERSAL REMOTE CONTROL ONE FOR ALL 7200MAN

[. . . ] URC 7200 / 7201 Cinema 7 User Manual PREV CH The PREV CH (Previous Channel) key operates the same as the Last Channel or Recall key on your original remote. The PREV CH key also controls the following functions in other modes: DVD/LD, RCVR, AUX and CD mode = Random. The CH v/w, VOL v/w, MUTE, PREV CH and Digit (0-9) keys are made of a phosphorescent material that glows-in-the-dark. Expose the keys to bright light to activate the glow-in-the-dark feature. [. . . ] The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 7 to operate your Receiver/Tuner. To program the Cinema 7 to operate your Receiver/Tuner: 1. 2. RCVR MAGIC 5. Aim the Cinema 7 at your Cable Converter or Satellite and press POWER. Your Cable Converter or Satellite should turn off. If your Cable Converter or Satellite does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your Cable Converter or Satellite. Your Cinema 7 is now programmed to operate your Cable Converter or Satellite. Write your Cable Converter or Satellite code in the boxes to the left for future reference. 1 5. For the first digit of your four-digit code, press 1 and count the number of times the red light (LED) blinks on the Cinema 7. If the light does not blink when you press the number 1, the digit is zero. For the second digit, press 2 and count the number of times the red light (LED) blinks on the Cinema 7. If the light does not blink when you press the number 2, the digit is zero. For the third digit, press 3 and count the number of times the red light (LED) blinks on the Cinema 7. If the light does not blink when you press the number 3, the digit is zero. For the fourth and final digit, press 4 and count the number of times the red light (LED) blinks on the Cinema 7. If the light does not blink when you press the number 4, the digit is zero. Now you have your four-digit code. 4. SEL 2 3 4 Remember, if you want to use your Cinema 7 to operate your TV, press the TV key first. Programming the Cinema 7 to operate your VCR: Locate the brand name of your VCR and then write it in the space below. VCR Brand: Locate the brand name of your VCR in the "Setup Codes For VCRs" section. The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 7 to operate your VCR. To program the Cinema 7 to operate your VCR: 1. 2. VCR MAGIC VOL VOL MUTE The VOLv (Volume Up), VOLw (Volume Down) and MUTE keys control the volume the same as the Volume Up and Down and Mute keys on your original remote. The CHv (Channel Up) and CHw (Channel Down) keys change channels the same as the Channel Up and Down keys on your original remote. [. . . ] Problems programming a TV/VCR combo? Now, whenever you press VOLv, VOLw or MUTE in the VCR, DVD/LD and CBL/SAT modes your TV will control the volume. If you would like to change the Volume Lock setting to the VCR, DVD/LD or CBL/SAT modes repeat steps 1-3, only substitute the appropriate device key. Setting the Volume Lock to the TV, VCR, DVD/LD or CBL/ SAT mode will not effect the volume control in the RCVR, AUX and CD mode. You can also change the Volume Lock setting so that an Audio component controls the volume in all device modes. [. . . ]