User manual UNIVERSAL REMOTE CONTROL ONE FOR ALL 8780

[. . . ] USING YOUR HOME THEATER PLUS Features and Functions The illustration below and the chart describe the features and the functions of the HOME THEATER PLUS keypad. The following keys will always have the same function, regardless of which component you are controlling. For an explanation of what each key does by component type, please use the index at the rear of the manual. Feature Function The SETUP key is used to access the menu and program your HOME THEATER PLUS. [. . . ] Use MENU ­ to toggle through [ONCE], [DAILY], or [WEEKLY], depending on when and how often you want the sequence to play. The display will change to the day of the week on which the sequence will begin. Use MENU ­ to toggle through the days of the week until a desired day is dis played. The display will change to [ENTER SEQ]. REPEATING A SERIES OF KEY PRESSES USING THE MACRO The HOME THEATER PLUS has one Macro key that will play back a series of key strokes at any time with the press of one key. Each sequence can have up to a maximum of 15 keystrokes. These keys are not mode specific and can be accessed in any mode. For example, to set up a sequence that will turn on devices and turn them to the proper inputs: 1 Press and hold SETUP until the display screen changes from [DEVICE x2 and the TIME] to [TIMED SEQ]. Press MENU ­ twice until the display reads [CONFIGURE], then press SEL. The display will then read [THEATR SEL]. x4 Press MENU ­ four times until the display reads [KEY MACRO]. Begin entering the sequence of keystrokes, up to 15. 2 0 or 1 2 3 NOTE: When setting up your sequence, you will need to include any keystrokes that would normally be required during regular usage, such as pressing ENTER after entering a channel number when changing channels. For example: (sequence) TUNER + POWER + TV + POWER + TV/SAT (to change the input on the TV to VIDEO 1) + SAT + POWER. 3 When your macro sequence is concluded, press ESC to save. 4 NOTE: When setting up your sequence, you will need to include any keystrokes that would normally be required during regular usage, such as pressing ENTER after entering a channel number when changing channels. For example, enter a sequence that will start your VCR recording your DSS channel as follows: SAT + POWER + SAT + 2 + 7 + 5 + VCR + POWER + VCR + RECORD. This sequence will turn on the DSS, change the channel to 275, and turn on the VCR and start it recording. When the sequence key is pressed, the Tuner will power ON, the TV will power ON and change its input to VIDEO 1, and then the Satellite will power ON. NOTE: If you make a mistake during the setup of a macro sequence, press ESC to return to the main display screen and begin the setup of your sequence again. HOW TO USE TH SHIFT KEY The HOME THEATER PLUS has additional features that can be accessed by using the SHIFT key. They are listed above the keys that they are mapped to. 9 For example, on the transport keys PLAY, REW, FF, STOP, and PAUSE, there are the following features: SLOW, SLOW+, SLOW ­, X2, and EJECT. If you want to eject a tape from your VCR, press: SHIFT + STOP This will eject your tape, as long as your original remote supported this feature. NOTE: Once you have pressed the SHIFT key, HOME THEATER PLUS will remain in the "Shift" mode, as indicated by an [S] on the LCD screen, for 5 seconds after the last key press or until the SHIFT key is pressed again. The following keys have functions that are shifted: MENU: MUTE: PREV CH: PIP: REW: PLAY: FF: STOP: PAUSE: SHIFT SHIFT SHIFT SHIFT SHIFT SHIFT SHIFT SHIFT SHIFT + + + + + + + + + MENU = CLEAR MUTE = SLEEP PREV CH = DISPLAY PIP = FREEZE PIP REW = SLOWPLAY = SLOW FF = SLOW + STOP = EJECT PAUSE = X2 4 Press MENU ­ one time to change the display to [LOCK] then press SEL. Now press the key for the component that will control your volume. For example, to control the volume through your amplifier, press AMP. [. . . ] The MENU key operates the same as the PROGRAM key on your original remote control. The SEL key operates the DISK SELECT function on your original CD Player remote control. The MENU + (Up) and MENU ­ (Down) keys access TRACK + and TRACK ­ respectively. MENU (Left) and MENU (Right) access DISK ­ and DISK + respectively. [. . . ]