User manual UNIVERSAL REMOTE CONTROL ONE FOR ALL 9900FAQ

[. . . ] Not able to directly access channels using numbers (0-9)?Some cable converters and TV's require the user to hit an ENTER button after the number button to "lock in" the channel. Universal remote requires the same sequence. CH +/- and PREV CH not working on your RCA TV? [. . . ] To test the code for these, have the player ON, a TAPE or DISC in the player, and test using either the PLAY or STOP function. POWER function not working on a TUNER or AMPLIFIER?Some TUNER/AMPS turn ON using one of the INPUT (TUNER, CD, DVD, etc. ) buttons with the original remote. If the INPUT button is not on the face of the remote, contact the Customer Service department at HYPERLINK mailto: ofasupport@ueic. com for instructions. POWER not working on the 0176 TUNER code?The original remote for this code had separate "ON" and "OFF" buttons. Our remotes have the "OFF" button mapped to the POWER button. You will need to program the 248 code for "ON" to another key using the "KEY MAGIC" instructions for advanced functions. My VCR does not operate with the setup code provided ?Some VCR's can be switched from a VCR1 to a VCR2 (or more) mode. This function allows you to use more than one of the same model VCR, (for instance for copying tapes), without accidentally performing a function on both units at the same time. There are separate setup codes for each of the modes on the remote (for instance: RCA VCR 0060/0202 = VCR1/VCR2). Try all of the codes for the brand of VCR you have to find the one that corresponds to your unit and mode. As a safety feature on our remotes, you must press the REC button two times in order to start recording . All of the TV/VCR combinations perform POWER, CH +/- , and the VCR functions using a VCR setup code. These will be found in your manual or at our website. Some TV/VCR combinations need a separate TV code or special programming to get the VOLUME functions. If you are experiencing problems, contact the Customer Service department at HYPERLINK mailto: ofasupport@ueic. com for assistance. 'SLEEP' button on remote not working sleep timer on device?Remote controls with 'SLEEP' function are programmed to first look for the 'SLEEP' function within the setup code for the device. If there is none there, then the remote will default to the 'built in' sleep timer. Some devices that did not originally have a 'SLEEP' function operate everything else using a setup code that does contain such a function. [. . . ] We are proud to have the largest library of IR codes in the world, but sometimes a remote is on the retail shelf just before a new device becomes available so it's chip doesn't have the brand new code. If you have a new device that is not listed or does not work with the codes provided for that brand, contact us so we can recommend a remote that will operate your device. The legally binding limited warranty for your remote is printed in the original instruction manual that came with your remote control. Generally, if your remote does not operate the basic functions of your devices, you can return it to the retailer where it was purchased within the 90 day warranty period. [. . . ]