User manual UNIVERSAL REMOTE CONTROL ONE FOR ALL OFA 6820 MANUA ENGLISH NOCODES

[. . . ] OFA 6L with Learning Owners Manual. fm Page 0 Thursday, February 17, 2005 1:10 PM 6-Device Universal Remote with Learning Control Remoto Universal de 6 Dispositivos con Aprendizaje User's Guide Guía del Usuario OFA 6L with Learning Owners Manual. fm Page 1 Thursday, February 17, 2005 1:10 PM OWNER'S MANUAL TABLE OF CONTENTS Introduction . . 10 Programming a Macro on a Device Key . . 13 Deleting Functions from the Learning Keys . . 14 Restoring Keymoved Keys to Default Settings. [. . . ] However, you can also program a Macro onto the Device keys to allow for additional functionality. For example, if your devices are connected to a receiver unit, you can program a Device macro to switch the receiver's input to the selected device. To Program the Device Key Macro For example, let's assume that your DVD in connected to Input 3 of your receiver. You can program a macro that will switch the receiver's input to input 3 when you press and hold the DVD key. Press and hold SET until the LED (red light) blinks twice, then release SET. Press the AUD key (to select the receiver) Press digit 3 (for the input), and press DVD (to return control to the DVD key). To save the settings and exit the program, press and hold SET until the LED blinks twice, then release SET. NOTE: After executing the Device Key Macro, the remote will return to the DVD mode, to allow the control of the DVD device. CLEARING A MACRO 1. Press and hold SET until the LED (red light) blinks twice, then release SET. Select a macro key (e. g. , M1, M2, POWER or any device key) you want to clear and press it once. Press and hold SET until the LED blinks twice, then release SET. The macro is now deleted but the keys (in the case of POWER and device keys), will retain their original function. 4. USING CHANNEL SCAN In the TV, VCR, DVD and CBL/SAT modes, use the FAV key to start a 3-second scan of all favorite channels (if programmed, "Programming Favorite Channel Scan" on page 12) and/or all channels for the selected mode. · If Favorite Channel Scan has been set up, scanning of favorite channels will start and cycle through stored channels, then proceed to the next channel up and cycle through all channels on the selected device. If Favorite Channel Scan has not been set up, scanning will start with the current channel, then proceed to the next channel up and cycle through all channels on the selected device. NOTE: You can program up to 20 functions on the Device Key Macro. You can program a device Key Macro onto any device key. After programming, point the remote control at the receiver and press the DVD key for at least 2 seconds. This will switch the Receiver's input to input 3, to allow you to view the DVD. NOTE: When you press the device key (e. g. , DVD) for less than 2 seconds, the remote will only select the DVD mode but will not change the Input on the receiver. This allows you to still change modes while using the remote. · Using Channel Scan 11 OFA 6L with Learning Owners Manual. fm Page 12 Thursday, February 17, 2005 1:10 PM ONE FOR ALL 6L UNIVERSAL REMOTE CONTROL WITH LEARNING 3. To stop scanning channels at any time, press any key once. includes a Learning feature so you can add functions that are unique to your home entertainment devices (e. g. , DVD EJECT). However, there are some considerations. PROGRAMMING FAVORITE CHANNEL SCAN In the TV, VCR, DVD or CBL/SAT mode, you can store a list of up to 10 favorite channels, in any order, that will be immediately scanned when you press FAV (see "Using Channel Scan" on page 11). [. . . ] Increase the separation between the equipment and receiver. Connect the equipment into an outlet or a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. · LIMITED WARRANTY One For All® warrants, to the original purchaser only, that this product will be free from defects in materials and workmanship, under normal use, for ninety (90) days from the date of original purchase. This limited warranty is valid only on ONE FOR ALL product purchased and used in the United States of America or Canada, and does not apply to products used for industrial or commercial purpose. [. . . ]