User manual UNIVERSAL REMOTE CONTROL PCL-300

[. . . ] Downloading a previously programmed configuration often provides a better starting point for programming and speeds customization even if the new system is slightly different from an archived file. The PCL-300 software includes a completely blank configuration for each of the remotes. These blank configurations have all labeling and codes deleted from all devices and buttons, enabling you to program small systems without extensive deleting of labels or commands. The PCL-300 also enables you to update the IR Database in the remote control and to update the operating system of the remote control itself whenever an improvement is available. [. . . ] Note that one pin on the connector attached to the PCL-300 is filled in. Orient the connector of the PCL-300 so that the filled in pin will match the pin pattern of the socket inside the remote control. 3. Carefully fit the plug from the PCL-300 into the socket on the remote control. Page 6 PCL-300 PC UPGRADE LINK Uploading a Configuration from the Remote to the PC 1. Click on the Upload icon on the toolbar or select Upload from the communications window. The message window should display "(Auto) Success connection with PC. " 2. The software now identifies whether it is connected to an MX-350 or an MX-650. Once it has identified the model, the Environment message will correctly identify the connected remote. Click on the Upload button to begin the upload process. 3. The window displays the progress as the file is uploaded. Page 7 PCL-300 PC UPGRADE LINK 4. When the file is completely uploaded, the Save As window will appear. Navigate to the folder you would like to save the file to, choose a file name and click on the SAVE button. Downloading a Configuration from the PC to the Remote 1. Before you can download a file, you must open a file. Click on the Open icon on the toolbar or choose Open from the File menu. Navigate to the file you'd like to download to another remote and click on the Open button. Click on the Download icon on the toolbar or select Download form the communications menu. The message window should display "(Auto) Success connection with PC. " The software now identifies whether it is connected to an MX-350 or an MX-650. Once it has identified the model, the Environment message will correctly identify the connected remote. Pull down the Download list and select the type of download you would like to do. Page 8 PCL-300 PC UPGRADE LINK Download Types: 1. User Configuration Only - This is the fastest way to download a configuration to a remote. However, the remote will not be updated with new IR database code sets, nor will the firmware be updated. Use this type of download after you've updated the firmware once. User Configuration, Firmware and IR Database Update - Use this type of download when you want a new configuration downloaded and you want the remote updated. [. . . ] Once the update is complete, close PCL-300 software. The changes only take effect when you restart the program. You do not have to reboot your PC. Page 11 PCL-300 PC UPGRADE LINK Warranty The PCL-300 is covered against any manufacturing defects or faults in workmanship for a period of one year from the date of purchase when purchased from an authorized Complete Control dealer. Units purchased from online auction sites or other unauthorized resellers have no warranty. [. . . ]