User manual UNIVERSAL REMOTE CONTROL TITAN REMOTE CONTROL

[. . . ] Titan Remote Control Users Guide Pour les instructions en français, veuillez consulter www. urcsupport. com Para instrucciones en español, por favor consulte www. urcsupport. com PREPROGRAMMED FOR YOUR SET-TOP BOX TABLE OF CONTENTS Features . 7 Basic Setup: Programming Device Control . 13 Deleting All Learned Keys in a Specific Mode . 15 Locking All Channel Control to One Device . [. . . ] Press and hold SETUP until the last-selected SETUP mode key blinks twice, then press 9 7 6. 2. Press a mode key once (i. e. , AUX, DVD, AUD, TV, or STB). Press the key containing the learned function to be deleted twice. Repeat steps 2 through 3 for another key or press and hold SETUP to exit programming. 3. 4. SETUP Deleting All Learned Keys in a Specific Mode NOTE: If more than 10 seconds pass between key presses, the remote exits programming. Press and hold SETUP until the last-selected SETUP mode key blinks twice, then press 9 7 6. 2. 3. SETUP Press a mode key twice (i. e. , AUX, DVD, AUD, TV, or STB) to clear all the learned keys for that mode. Repeat step 2 through 3 for another mode and/or key or press and hold SETUP to exit programming. www. urcsupport. com 13 PROGRAMMING VOLUME LOCK Volume Lock allows you to set your remote to direct all volume commands to whichever home theater device you designate as your audio source. By default, Global (All) Volume Lock is set to TV, so you can control TV volume while in any mode on your remote. You can also perform Volume Lock on a selected device or set of devices to set Volume Lock to function on some modes, but not on others. Locking All Volume Control to a Single Device To change the Global Volume Lock setting from TV (default) to another device, follow these steps: 1. Press and hold SETUP until the mode LED SETUP blinks twice. The mode LED blinks twice. 3. Press VOL+ once. The mode LED blinks once. 4. Press the mode key for the device that you wish volume functions to control. The mode LED blinks twice. Now pressing VOL+, VOL-, or MUTE controls only that device's volume, regardless of operating mode. Locking Volume Controls for Specific Device Modes To set Volume Lock to occur for some device modes, but not others, you must first follow the steps under "Unlocking All Volume Locks" on page 15. Press the mode key for the device that you wish volume functions to control. On the remote control, press and hold SETUP SETUP until the last-selected device key blinks twice. The mode key LED blinks twice. www. urcsupport. com 14 4. 5. SETUP Press each mode key that relates to the devices that you do not use for volume control. These will be the modes in which the volume functions control the device related to the mode key you pressed in step 1. Any mode omitted from this step will have all volume controls assigned to that mode's device. The mode LED blinks twice. Unlocking All Volume Locks Performing these instructions sets independent volume control for all programmed devices (e. g. , when in DVD mode, the VOL and MUTE keys send commands to the DVD player). [. . . ] PROBLEM: Tried Search Method and still could not find a working code. SOLUTION: Try the Search Method again after clearing out the device key as follows: a. Press and hold SETUP until device key blinks twice. Press and release the device key to be cleared twice. [. . . ]