User manual UNIVERSAL REMOTE CONTROL UR3-J22TWM

[. . . ] STEP4 Store the three-digit code number by pressing the same [DEVICE] button once again. The LED will blink twice to confirm that the code has been stored. *Note : Try all the functions on the remote control. [. . . ] Note : Ten blinks is equal to the number 0. STEP4 Store the three-digit code number by pressing the [VCR POWER] button once again. The LED will blink twice to confirm that the code has been stored. E. Volume Punch Through: By following the steps below, the user can program the volume controls (Volume UP, Volume Down and MUTE) from one device to operate in another device mode. The default volume control settings on the remote control is TV volume control. If you wish to store the CABLE volume control in CBL mode, use the following steps. STEP1 Press the [CABLE POWER] button and the [SEL] button simultaneously for 3 seconds. *Tip : The LED will light on for 20 seconds. The next step must be entered while the LED is on. The LED will blink twice to confirm the programming. To return to original state: If you wish to restore the TV volume control in CBL mode, repeat the above steps by pressing [TV POWER] in step 3. turns the volume up and down displays help for on-screen display screens HEL P INFO future use FAV cycles through your favorite channels MUTE turns volume off future use recalls the last channel that was viewed switches between cable TV and Music Choice TM displays the quick function screen MOVIES future use INFO displays channel and program information exits the on-screen display menus CABLE GUIDE displays the program guide CURSOR KEYS navigate through on-screen guides displays the main on-screen display menu SEL SEL selects options from the program guide and be used to set up the remote. B. Auto Search Method. If the three-digit code numbers assigned to your brand do not turn off your equipment or the code tables do not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by the following steps: STEP1 Turn on the equipment you wish to operate. STEP2 Press the [DEVICE] button (TV POWER or VCR POWER) to be programmed and the [SEL] button simultaneously for 3 seconds. *Tip: The LED will light on for 20 seconds. The next step must be entered while LED is on. STEP3 Point the remote control toward the equipment and alternately press the [CH+] (or [CH-]) button and the [MUTE] button. If the right code number is sent, the equipment will turn off. *Tip : You can verify that you selected the correct code by pressing the [MUTE] button again. The equipment should either turn on or turn off. DAY +/- moves the program guide one day pages through on-screen menu and program guide screens forward and backward TV/VCR switches between control of your TV and your VCR initiates VCR recording through the on-screen menu (if so equipped) VCR/DVD KEYS perform standard VCR and DVD functions when in VCR mode. D. [. . . ] The next step must be entered while the LED is on. STEP3 Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables. F. LOW BATTERY WARNING: When the battery is low (2. 0V-2. 3V) and needs to be replaced with fresh batteries, the LED will blink twice whenever a device [POWER] button is pressed to turn on equipment. 4 Operations Default State : Device Default: Motorola CFT2200 Volume Default : TV volume and mute through the TV, with the option of controlling volume and mute through the Cable Converter. [. . . ]