User manual UNIVERSAL REMOTE CONTROL UR5U-8700L-IP

[. . . ] If any of the functions do not work as they should, repeat from STEP 3 using the next 3-digit code number listed for that brand until you find the best Component code. STEP5 Once you have found the correct 3-digit code, save it by pressing the same [COMPONENT] button one more time. The Component LED light will blink twice to confirm that the code was successfully stored. Now, program the rest of your Components by repeating STEPS 1-5. [. . . ] The Component LED light will turn on for 30 seconds. STEP2 Press the [INFO] button and count the number of times the Component LED light blinks. This number indicates the first digit of the code, followed by the second and third, each separated by a one second pause when the LED will turn off. *Note : 10 blinks represents the number zero. Example : One blink, (pause), eight blinks, (pause) and three blinks, indicates code number 183. VOLUME Raises or lowers the sound level. A, B, C, D Make direct selections from on-screen menus. FAV Displays favorite channels. CHANNEL Selects the next higher or lower channel. ON DEMAND Provides direct access to On Demand channel. LAST Returns to the previously tuned channel. Code Programming Method - Section A). If any of the functions do not work as they should, you need to find a new code. STEP5 Once you have found the correct 3digit code, save it by pressing the [AUX] button one more time. The Component LED light will blink twice to confirm the code was stored. Now when you press the AUX button, all the buttons will work with that 5th Component. G. Programming Volume Control channel you want programmed first (for example, 007) using the Number Pad, then press the [STOP] button. Then enter the code for the next channel (for example, 050), then press the [STOP] button. Repeat this process for the third channel. The [STB] button will blink once for each channel entered. CBL-CABLE Converters Manufacturer/Brand SCIENTIFIC ATLANTA PIONEER PACE SAMSUNG MOTOROLA GENERAL INSTRUMENT HAMLIN HITACHI JERROLD MAGNAVOX MEMOREX MOXI PANASONIC PHILIPS PULSAR RCA REGAL REGENCY SKY SONY SPRUCER TOCOM TOSHIBA VIEWSTAR ZENITH Set-Up Code Number 001 003 041 042 045 046 001 103 034 051 063 076 105 001 005 002 001 030 002 111 148 005 103 104 049 050 055 103 055 005 004 103 005 003 008 009 010 069 010 012 052 111 252 044 047 006 012 013 020 085 052 047 049 050 057 230 108 047 039 040 056 052 012 015 052 060 093 100 BACK Takes you to the screen you visited previously. INTERACTIVE Displays the IPTV interactive. E. Programming the System On/Off Button This allows you to program the System On/Off button so it can send up to five power On/Off commands with one button press. STEP2 Press the [SYSTEM ON/OFF] button and the [OK/SEL] button simultaneously for 3 seconds. The [STB] button will turn on for 30 seconds. STEP3 Press the first [COMPONENT] button you want to store in the [SYSTEM ON/OFF] button and then the [POWER] button. Repeat this for other Components until you have stored all the desired power commands into the [SYSTEM ON/OFF] button. STEP4 Press the [CH ] button to save the power commands you stored. The [STB] button will blink twice to confirm the commands have been saved. Volume and Mute control are factory- STEP4 Press the [CH ] button to store the channels that were selected. The [STB] programmed to automatically transfer to the button will blink twice to confirm the respective Component mode you select, as storage of commands. follows: To access the programmed channels, press the [MACRO] button once. [. . . ] You have the option of controlling your STB channel and numbers through the TV or VCR. Refer to section F for programming steps. Volume Default: Volume and Mute control are automatically transferred to the respective Component mode you select, as follows: STB: Set Top Box / TV: TV / AUX: AUX. Volume and Mute control for VCR and DVD are automatically transferred to the TV. [. . . ]