User manual US ROBOTICS 56K PCI FAXMODEM QUICK INSTALLATION GUIDE REV 1

[. . . ] Robotics Corporation 935 National Parkway Schaumburg, Illinois 60173-5157 USA No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as a translation, transformation, or adaptation) without written permission from U. Robotics Corporation reserves the right to revise this documentation ad to make changes in the products and/or content of this document from time to time without obligation to provide notification of such revision or change. Robotics Corporation provides this documentation without warranty of any kind, either implied or expressed, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product as a separate document, in the hard copy documentation, or on the removable media in a directory named LICENSE. [. . . ] You will then have the option to accept the call or to ignore it. If you choose to accept the call, another message will appear notifying you of the length of time that the provider's system will wait on hold before the data connection is terminated. You can then return to the connection when the call is completed without losing the connection. If you are connecting to a service provider that does not support V. 92, you will receive a message informing you of an incoming call. You will then have the option to accept the call or to ignore it. If you choose to accept the call, your data connection will be terminated. Follow the on-screen instructions to complete the installation of the software. When you register your modem online, USRobotics will use your information to: · Inform you of future product support notices, alerts, and changes to our support offerings. Invite you to participate in market research, new product definition studies, and beta test programs. USRobotics will not sell or provide any personal information that identifies you or any individual to any outside source. You can also register your modem online at Step 2: Finish removing the modem from the computer. CAUTION: To avoid the risk of electrical shock, make sure your computer and all peripheral devices are turned off and unplugged. Disconnect all telephone cables from any existing modems before opening the computer's cover. Touch an unpainted metal area of your computer's case to ground yourself, which protects your equipment from electrostatic discharge. Turn off your computer and all peripheral devices. Unplug your computer and disconnect all telephone cables from any modems. If you have any difficulty with your modem, first make sure that it was installed correctly. Make sure that your modem is physically installed correctly in your computer. With your computer turned off, you will need to press the modem in firmly so that it is seated properly in its slot. When the modem is installed correctly, you will no longer see any part of the gold edge. See Step 1 in this guide for complete instructions. [. . . ] All calls are routed differently, so try placing the call again. 92 protocol adds upload speeds of up to 48K, but line conditions may affect the actual speeds during a given connection. Due to unusual telephone line configurations, some users will not be able to take full advantage of V. The server you're dialing into must support and provide a digital V. [. . . ]