User manual US ROBOTICS COURIER 56K BUSINESS MODEM QUICK INSTALLATION GUIDE FOR WINDOWS

[. . . ] Product specifications subject to change without notice. You will find more detailed technical information on the Installation CD-ROM that came with your modem. NOTE: Before you begin, we recommend you uninstall any other modems you have in your system and unplug all telephone cords connected to these modems. refer to your previous modem's documentation for instructions. [. . . ] When Windows finds the driver, click Finish to complete the installation. Windows XP NOTE: Windows XP users must be in administrator mode to properly add any new hardware. Windows will detect your new modem and automatically install it, then you must update the driver. Make sure you are in Classic View, and double-click the System icon. When the Hardware Update Wizard appears, select Install from a list or specific location (Advanced) and click Next. If your CD-ROM drive uses a different letter, type that letter in place of "D". All Other Operating Systems Beyond full support of the Windows Operating Systems described in this manual, the Courier 56K Business Modem will function in any operating system that supports an RS-232 COM port, such as DOS, Linux, or UNIX. standard COM port settings are: bits per second: 115 , 200; data bits: 8; parity: none; stop bits: 1; flow control: hardware. Assign your terminal application to utilize the COM port to which you connect the modem's serial cable. Additional setup information can be found in the 3453 FAQ section at http://www. Robotics has thoroughly tested this driver in conjunction with the supported hardware and has verified compatibility with Windows XP and 2000. The Instant Update software automatically notifies you of any updates to your modem's code. To install the Instant Update software, keep the Installation CD-ROM in your CDROM drive. If your CD-ROM drive uses a different letter, type that letter in place of "D". Internet Call Notification lets you take an incoming voice call without dropping your Internet connection. â· To install the Internet Call Notification software, keep the Installation CD-ROM in your CD-ROM drive. If your CD-ROM drive uses a different letter, type that letter in place of "D". If your CD-ROM drive uses a different letter, type that letter in place of "D". at the Installation CD-ROM interface , click the Support link. Follow the on-screen instructions to register your modem. NOTE: The modem needs to be installed and communicating with the computer before the country setting can be changed. Select the country in which you plan to operate the modem and enter the AT command ATC10=XX. [. . . ] this means that the installation was a success. If you do not see commands and responses, shut down and restart your PC. To determine if your modem is functioning properly, repeat the steps above. If your modem is still not working, refer to the "Troubleshooting" section of the User Guide on the Installation CD-ROM. [. . . ]