User manual US ROBOTICS USR1120 REFERENCE GUIDE

[. . . ] 11 Mbps Wireless USB Adapter Companion Reference Guide R24. 0271. 00 11 Mbps Wireless USB Adapter Installation Note: For the most recent installation information, refer to the product Web site at http://www. usr. com/support. You can also refer to the User Guide on the Installation CDROM for more detailed information. Step One: Prepare for Installation Turn on your desktop or laptop computer. Type your password if you are prompted to do so. Make sure you have an available USB port on your computer. [. . . ] Double-click Add/ Remove Programs and then click the Windows Setup tab. Select Communications and then click Details. Select Internet Connection Sharing and click OK. Click Apply and the Home Networking Wizard will launch. Click Next and then select Yes this computer uses the following. Select the direct connection to the Internet from the drop-down menu and click Next. When prompted, create a Home Networking Setup disk to be used for the configuration of Internet sharing in Windows 98, and Me. After you have created the disk, click Next. Click Finish to complete the configuration of Home Networking. You will then need to restart your computer. Troubleshooting My computer does not recognize the 11 Mbps Wireless USB Adapter. Possible Solution: The 11 Mbps Wireless USB Adapter may not be properly connected. Check the connections of the USB cable to the 11 Mbps Wireless USB Adapter and to the USB port on your computer. I accidentally clicked Cancel during the Installation procedure. Possible Solution: Remove and reinsert the U. S. Robotics Installation CD-ROM into your CD-ROM drive. Repeat the installation procedure of the software before you install any hardware. The Installation procedure did not begin when I inserted the Installation CD-ROM. Possible Solution: Some programs may keep the autolaunch feature of the Installation CD-ROM from beginning. Close any open applications and reinsert the Installation CD-ROM. The 11 Mbps Wireless USB Adapter is not receiving any power. Possible Solution: If you have the 11 Mbps Wireless USB Adapter plugged into a peripheral device, such as a USB hub or a keyboard, the 11 Mbps Wireless USB Adapter may not be powered. Plug the 11 Mbps Wireless USB Adapter directly into a USB port on your computer. The 11 Mbps Wireless USB Adapter does not work properly and I may need to uninstall the device. Possible Solution: Check and be certain the 11 Mbps Wireless USB Adapter is not in use before removing it. The computer will lock up if the 11 Mbps Wireless USB Adapter is in use and is removed. If the 11 Mbps Wireless USB Adapter is not functioning correctly, perform the following steps: · Click Windows Start, Settings, and Control Panel. Double-click System and uninstall the 11 Mbps Wireless USB Adapter or click Windows Start, Programs, 11 Mbps Wireless USB Adapter, and then Uninstaller. Reinstall the 11 Mbps Wireless USB Adapter and reinstall the correct drivers. · The 11 Mbps Wireless USB Adapter cannot communicate with other computers linked via Ethernet in the Infrastructure configuration. Possible Solution: · Ensure that each computer in the wireless network is powered on. · Ensure that the stations is configured with the same operating radio channel as the 11 Mbps Wireless USB Adapter. If the IDs are different, change the 11 Mbps Wireless USB Adapter and all the stations within the network to another radio channel. · Ensure that each 11 Mbps Wireless USB Adapter is configured with the same security options. · · · · Ensure that the BSS ID for a roaming disabled station is the same as the 11 Mbps Wireless USB Adapter. [. . . ] Robotics Corporate Service Center or an Authorized U. S. Robotics Service Center within the applicable warranty period to obtain warranty service authorization. Robotics or its authorized reseller may be required. Robotics' Corporate Service Center must be preauthorized by U. S. [. . . ]