User manual US ROBOTICS USR2210 QUICK START

[. . . ] If the release lever is not being pushed out, the 22 Mbps Wireless PC Card is not being inserted properly. Remove the 22 Mbps Wireless PC Card and try inserting it facing the opposite way. 22 Mbps Wireless PCI Adapter Installation Prepare for installation Make sure your computer is turned off. It is very important that you have your serial number written down before you install the 22 Mbps Wireless PCI Adapter. You can find your serial number on the back label of the 22 Mbps Wireless PC Card and on the side of the package. [. . . ] Robotics Installation CD-ROM. Serial Number Note: Be sure to find out what letter your CD-ROM drives uses before you begin installing your new product. You will need to know this to properly install your software. Note: During the Installation procedure, you may be prompted for your Windows Operating System CD-ROM. Make sure you have that available in case you need it. Note: If the Choose Setup Language window appears, select your preferred language and click OK. Note: If your CD-ROM does not automatically launch, click Windows Start, Run, and type D:\setup (or the appropriate letter of your CD-ROM drive) and click OK. Some files will be copied to your system, and then you will be asked to read the license agreement. The Installation CD Graphic User Interface (GUI) will appear on your screen. Click Install Wireless Card Utility and Drivers. Follow the on-screen instructions and wait for some files to be copied to your hard drive. A window will appear showing you the files that are being loaded onto your system. When you are prompted to reboot your computer, select No, I will restart my computer later and click Finish. Close the Installation CD Graphic User Interface (GUI). When your desktop returns, shut down your computer. *A "Digital Signature Not Found" screen may appear. Windows Me and 2000 will verify that your network device is properly installed. R24. 0285. 00 22 Mbps Wireless PC Card Installation Guide Note: For the most updated information, visit: http://www. usr. com/support. You can also refer to the Companion Reference Guide and to the User Guide on the U. S. Robotics Installation CD-ROM for more detailed information. Install your software and drivers* Note: You will need to install this software on all the laptops you plan to wirelessly network together. Robotics Installation CD-ROM into your CD-ROM drive. Note: If the Choose Setup Language window appears, select your preferred language and click OK. Note: If your CD-ROM does not automatically launch, click Windows Start, Run, and type D:\setup (or the appropriate letter of your CD-ROM drive) and click OK. Some files will be copied to your system, and then you will be asked to read the license agreement. The Installation CD Graphic User Interface (GUI) will appear on your screen. [. . . ] You will need to know this to properly install your software. Note: During the Installation procedure, you may be prompted for your Windows Operating System CD-ROM. Make sure you have that available in case you need it. When Windows detects the new hardware, click Next. Follow the on-screen instructions to complete the installation procedure. [. . . ]