User manual US ROBOTICS USR2415 REFERENCE GUIDE

[. . . ] Wireless Access PC Card and PCI Adapter Windows 95, 98, Me, NT, 2000, and XP Companion Reference Guide R24. 0260. 00 Wireless Access PCI Adapter Installation Note: For the most recent installation information, refer to the product Web site at http://www. usr. com/support. You can also refer to the User Guide on the Installation CD-ROM for more detailed information. Some files will be copied to your system, and then you will be asked to read the license agreement. Read the agreement and click Yes. Software Installation Step One: Prepare for installation Turn on your desktop computer. Type your password if you are prompted to do so. Note: It is important that you have your serial number written down before you install the Wireless Access PCI Adapter. [. . . ] I accidentally clicked Cancel during the Installation procedure. Possible Solution: If you reboot your computer, Windows will detect the new hardware and restart the Installation procedure. The Wireless Access PC Card or PCI Adapter does not work properly. Possible Solution: Laptop users, disable the PC Card and then eject it. Reboot your laptop computer and then reinsert the PC Card. Refer to your computer's documentation for the proper instructions to perform these steps. Desktop users, disable the PCI Adapter, reboot your computer, and then re-enable the PCI Adapter. Refer to your computer's documentation for the proper instructions to perform these steps. For Windows Me, NT, and 2000, ensure that a PCMCIA card service driver is installed in your computer. Perform the following steps to check for the service driver: 1) Double-click Control Panel and then PC-card. Check to see if it has the Wireless Access PC Card in one of the slots. Robotics Wireless Access PC Card in one of the slots, then the card has been properly detected. If you see a yellow question mark, there are conflicting resources or the driver is not correctly installed. 2) Right-click My Computer and then click Properties. Select the Device Manager tab and double-click Network Adapter. If it is installed correctly, you will see U. S. Robotics Wireless Access PC Card Adapter. If you see a yellow question mark, there are conflicting resources. Click PCMCIA Card and then PCMCIA Card Service. This will show the status of the PCMCIA card. If there is a yellow question mark on the adapter or on the PCMCIA card, verify the following: · Your notebook supports a 5V PCMCIA card. If the Wireless Access PC Card or PCI Adapter does not function after attempting the above steps, remove the Wireless Access PC Card or PCI Adapter and perform the following steps: · Click Windows Start, Settings, and Control Panel. [. . . ] Robotics Corporate Service Center or an Authorized U. S. Robotics Service Center within the applicable warranty period to obtain warranty service authorization. Robotics or its authorized reseller may be required. Robotics' Corporate Service Center must be pre-authorized by U. S. [. . . ]