User manual US ROBOTICS USR3056 QUICK START

[. . . ] Robotics 56K PC Card Winmodem with XJACK® Connector Quick Installation Guide for Windows 95, 98, Me, 2000, and XP Operating Systems Model 3056 Part Number R24. 0322. 00 Installation Guide Package contents Your U. S. Robotics 56K PC Card Winmodem with XJACK® Connector package contains the following items: · · · · U. S. Robotics 56K PC Card Winmodem with XJACK Connector RJ-11 phone cord Quick Installation Guide Installation CD-ROM, which contains software and a User Guide for use with your new modem What will you need You will need the following items to install your U. S. Robotics 56K PC Card Winmodem with XJACK Connector: · · Notebook computer with an empty PC card slot Analog telephone line Caution: The U. S. [. . . ] Robotics Corporation 935 National Parkway Schaumburg, Illinois, 60173 U. S. A. 18 Installation Guide Package contents Your U. S. Robotics 56K PC Card Winmodem with XJACK® Connector package contains the following items: · · · · U. S. Robotics 56K PC Card Winmodem with XJACK Connector RJ-11 phone cord Quick Installation Guide Installation CD-ROM, which contains software and a User Guide for use with your new modem What will you need You will need the following items to install your U. S. Robotics 56K PC Card Winmodem with XJACK Connector: · · Notebook computer with an empty PC card slot Analog telephone line Caution: The U. S. Robotics 56K PC Card Winmodem with XJACK Connector requires a standard analog telephone line. Do not connect your modem to a digital telephone line. Digital lines are commonly used in office buildings and hotels. If you are unsure whether your line is analog or digital, ask your network administrator, building management, or your local telephone company. Before You Begin: Preparing for installation Note: U. S. Robotics recommends uninstalling any other modems that are installed in your system and unplugging all telephone cords connected to these modems. Refer to your previous modem's documentation for instructions. Write down your new modem's serial number, which is located on the white bar code sticker on the modem and on the modem's box, in the space below. If you ever need to call our Technical Support department, you will need the serial number and the model number to receive assistance. If you need to get assistance or download drivers from the Web site, you will need the product ID. Model Number 3056 Product ID USR3056 Serial Number 3 Installing the U. S. Robotics 56K PC Card Winmodem with XJACK® Connector Step One: Install the modem. Turn off your computer. Insert the modem into the PC card slot in your computer. The top of the modem has an arrow indicating which end should be inserted into the computer. Make sure that the modem is firmly seated in the PC card slot. Step Two: Connect the phone cord. Push in on the XJACK connector to pop it out of the PC card. Connect one end of a standard RJ-11 phone cord to the XJACK connector and the other end to an analog telephone wall jack. Refer to this illustration: Step Three: Install the drivers. Note: If at any time during the installation you are prompted to select the location of your installation drivers, select the CD-ROM drive where the Installation CD-ROM is loaded (D:\ for example). For Windows 2000 and XP users, also select the 2000_XP folder on the Installation CD-ROM (D:\2000_XP for example). Note: Windows 2000 and XP users must be logged in using an account with administrative privileges before attempting to install the modem drivers. [. . . ] ROBOTICS NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, OR USE OF ITS PRODUCTS. ROBOTICS SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO OPEN, REPAIR, OR MODIFY THE PRODUCT, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, POWER CUTS OR OUTAGES, OTHER HAZARDS, OR ACTS OF GOD. ROBOTICS ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF U. S. ROBOTICS OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT U. S. [. . . ]