User manual US ROBOTICS USR9000 INSTALL GUIDE

[. . . ] Robotics Corporation 935 National Parkway Schaumburg, Illinois 60173-5157 USA No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from U. S. Robotics Corporation reserves the right to revise this documentation and to make changes in the products and/or content of this document from time to time without obligation to provide notification of such revision or change. Robotics Corporation provides this documentation without warranty of any kind, either implied or expressed, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product as a separate document, in the hard copy documentation, or on the removable media in a directory file named LICENSE. TXT or !LICENSE. TXT. [. . . ] Contact the telephone company and have them inspect the external telephone wiring. Troubleshooting Tips My computer failed the system qualification test. The setup verifies that your computer has the minimum system requirements for several resources including hard drive space, RAM, operating system level, and processor speed. If any of these resources are under the required value, the Results screen will identify which resources did not meet the requirement. In a case of a resource being under the required value, update your computer to the recommended resource level. When I plugged in my modem the New Hardware Wizard did not display. · · · · Review the Troubleshooting Checklist at the beginning of this section. If a second USB port is available on your computer, try connecting the USB cable into that USB port. If the USB device is not recognized, check the computer manufacturer's documentation. If applicable, confirm that the USB cable is plugged into a powered USB port. Powered USB ports are normally located directly on the back panel of the computer and not on the keyboard. · I ran a test using the U. S. Robotics SureConnect ADSL utility, and the Internet Connection Test failed. The modem was able to connect to the telephone company but was unable to reach the Internet Service Provider (ISP). There may be a problem connecting to the Domain Name Service (DNS) maintained by the Internet Service Provider. Try disconnecting the dial-up connection and dialing it again. If the test still fails, call your ISP for assistance. The installation failed ­ How to uninstall the modem. You will need to uninstall the failed installation. · · · · Click Windows Start, select Settings and click Control Panel. You may have to scroll down to locate this program. Click Add/Remove or Change/Remove in Windows 2000. Robotics SureConnect ADSL utility and the Modem test failed. The Modem test will fail if the computer is unable to communicate with the modem or if the modem does not successfully complete the self-test. [. . . ] Robotics for repair, whether under warranty or not. OBTAINING WARRANTY SERVICE: Customer must contact a U. S. Robotics Corporate Service Center or an Authorized U. S. Robotics Service Center within the applicable warranty period to obtain warranty service authorization. [. . . ]