User manual US ROBOTICS USR997901 INSTALLATION GUIDE

[. . . ] There may be a network or Internet connection problem if the LED on the 10/100 Ethernet PCMCIA Adapter does not illuminate or if you cannot access any network or Internet resources from the computer. Check the following items: Possible Solution: Make sure you are using Category 5 cable for 100 Mbps connections and that the length of any cable does not exceed 100 m (328 ft). Inspect all network cables and connections. Make sure the network cable is securely attached to the 10/100 Ethernet PCMCIA Adapter's connector. [. . . ] UL Listing/CUL Listing This information technology equipment is UL-Listed and CUL-Listed for use with UL-Listed personal computers that have installation instructions detailing user installation of card accessories. TUV Safety Instructions Read these safety instructions carefully. Keep this Installation Guide for future reference: 1. Remove the 10/100 Ethernet PCMCIA Adapter from your computer before cleaning. Do not use liquid or sprayed detergent for cleaning. Keep the 10/100 Ethernet PCMCIA Adapter away from a humid environment. Place the 10/100 Ethernet PCMCIA Adapter on a stable surface during installation. Dropping the 10/100 Ethernet PCMCIA Adapter may damage it. All cautions and warnings about the 10/100 Ethernet PCMCIA Adapter should be noted. Do not pour any liquid into the PCMCIA slot of your computer. This can cause an electrical shock or a fire. If one of the following situations arises, have the 10/100 Ethernet PCMCIA Adapter checked by an authorised service centre as listed in the Limited Warranty: · Liquid has penetrated the 10/100 Ethernet PCMCIA Adapter. · The 10/100 Ethernet PCMCIA Adapter has been exposed to moisture. · The 10/100 Ethernet PCMCIA Adapter is not working properly. · The 10/100 Ethernet PCMCIA Adapter has been dropped or damaged. · There are obvious signs of breakage on the 10/100 Ethernet PCMCIA Adapter. Do not leave the 10/100 Ethernet PCMCIA Adapter in an environment unconditioned; To avoid damage, do not store the 10/100 Ethernet PCMCIA Adapter at a temperature above 140 F (60 C). For Canadian Network Card Users Industry Canada (IC) This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of Industry Canada. «AVIS : Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de classe B prescrites dans la norme sur le matériel brouilleur : "Appareils Numériques", NMB-003 édictée par l'Industrie Canada. Centre de guarantie et de service après-vente: U. S. Canada V6V 2G9 CE Compliance This device complies with the requirements of European Directive 1995/5/EC. Robotics Corporation of 935 National Parkway, Schaumburg, Illinois, 601735157, U. S. A. , declare under our sole responsibility that the U. S. [. . . ] ROBOTICS PRODUCT MAY INCLUDE OR BE BUNDLED WITH THIRD-PARTY SOFTWARE, THE USE OF WHICH IS GOVERNED BY A SEPARATE END-USER LICENSE AGREEMENT. ROBOTICS WARRANTY DOES NOT APPLY TO SUCH THIRD-PARTY SOFTWARE. FOR THE APPLICABLE WARRANTY, PLEASE REFER TO THE END-USER LICENSE AGREEMENT GOVERNING THE USE OF SUCH SOFTWARE. OBTAINING WARRANTY SERVICE: Customer must contact a U. S. [. . . ]