User manual VAISALA AQM60 DATASHEET

[. . . ] www. vaisala. com Vaisala Air Quality Monitoring System AQM60 Benefits Overview Air pollutants can be harmful to public health and the environment, especially near roadways where vehicles emit gases continually in a localized area. [. . . ] The Vaisala Air Quality Monitoring System AQM60 system measures many of the pollutants considered harmful by the EPA (Environmental Protection Agency) including: Nitrogen Dioxide (NO2); Ozone (O3); Carbon Monoxide (CO); Carbon Dioxide (CO2); and Particulate Matter (PM2. 5 and PM10). The Vaisala Air Quality Monitoring System AQM60 integrates with RWIS (Road Weather Information System), advisory radio systems, and ITS software platforms to provide weather, traffic and air quality data on one system. This allows customers to not only mitigate and control pollutant levels, but also save costs by combining their weather and traffic monitoring with the air quality system. Site-specific air quality monitoring Air quality, weather and traffic data collected at one site Safer traveling environment for motorists Provides data for mitigation and control of pollutant levels Alert the public about poor air quality Cost-effective Features Configure the system with up to six sensors to meet your needs Optional noise sensor Rapid real-time data sampling (2-minute) Large data storage capacity (>15 years) Data available in Vaisala software Modular design enables easy maintenance Remote diagnostic capabilities Weatherproof and compact enclosures Technical data Sensors (most common) NO2; O3; CO; CO2; VOC; PM2. 5 and PM10 Applications Other Sensor Options Noise and SO2 Environmental Operating Range -20 °C to 60 °C (-4 °F to 140 °F) with appropriate Thermal Management System (TMS)* 10 to 90 %RH (non condensing) Urban and remote roadways Traffic flow control Identification of air quality trouble spots Tunnel monitoring Airports (noise detection can be included) Before /after road construction or mitigation strategies Long term air quality trend analysis Short term environmental impact assessments Local community exposures: residential, schools, pedestrians, shopping centers Power Requirements 12 VDC (power subject to configuration) AC power module 100 - 240 VAC Maintenance Checks Routine 3, 6 or 12 months (site dependent) Approvals Electrical Safety and Conformity: CE; UL E215312 Gas Sensors: EN50082-1:1997; EN50081-1:1992; Part 15 FCC Rules; IPCA 610D Class 2 Particle Monitor: Class 1 laser; IEC 60825-1:1998 Sensor Modules** Gas RanGe accuRacy Environmental Operating Range -40 °C to 60 °C (-4 °F to 140 °F) with appropriate Thermal Management System (TMS)* 10 to 90 %RH (non condensing) Nitrogen Dioxide (NO2) Ozone (O3) Carbon Monoxide (CO) Carbon Dioxide (CO2) Volatile Organic Compounds (VOC) Particulate Matter (PM2. 5 and PM10) 0 - 0. 2 ppm 0 - 0. 15 ppm 0 - 25 ppm 0 - 2000 ppm 0 - 25 ppm 0 - 2000 µg/m3 <± 0. 010 ppm <± 0. 005 ppm <± 1 ppm < 40 ppm + 3 % <± 10 % 8 % of NIOSH 0600 * TMS is customized for the sensor configuration and the environmental conditions at each location. ** Other sensor modules available upon request. For more information, visit www. vaisala. com or contact us at sales@vaisala. com Ref. B211062en-a ©Vaisala 2010 This material is subject to copyright protection, with all copyrights retained by Vaisala and its individual partners. any logos and/or product names are trademarks of Vaisala or its individual partners. [. . . ] all specifications -- technical included -- are subject to change without notice. [. . . ]