User manual VALEX SP9200#ASTM TUBE PART NUMBER MATRIX

[. . . ] DECIMAL MAY BE OMITTED AND REPLACED WITH ZEROS IN SOME PROCESSES (I. E. SHADED COLUMNS USED ONLY FOR 4-METER LENGTH TUBES. VISUAL CRITERIA IS TO BE USED IN CONJUCTION WITH SURFACE ROUGHNESS AS INDICATED. www. valex. com TITLE TUBE, PIPE, AND FITTING ITEM NUMBER SCHEME SPECIFICATION SP-9200 SHEET 2/9 REV AE ASTM SINGLE WALL FITTING PART NUMBER MATRIX XX PROCESS CODE AD = SP-9206 (201) B = SP-9206 (201) D = SP-9206 (201) E = SP-9220 (401) G = SP-9232 (501) H = SP-9207 (222) AS/AW 0S/0W 2S/2W 0S/0W ES HS XXXX CONFIGURATION CODE 2 = 90 DEG ELBOW 2W = 90 DEG ELBOW, WLD 2K = 45 DEG ELBOW 2KW = 45 DEG ELBOW, WLD 7 = EQUAL TEE 7W = EQUAL TEE, WLD 7R = REDUCING TEE - XXXXX SIZE CODE (SEE NOTE 2) . 25 = 1/4" O. D. X . 039" (1MM) WALL . 375 = 3/8" O. D. [. . . ] PROCESS CODES ARE NOT AVAILABLE FOR ALL TYPE CODES (MATERIAL) AND SIZES. PLEASE CONTACT VALEX SALES FOR ITEM NUMBER AVAILABILITY. SHADED COLUMNS USED ONLY FOR REDUCING FITTINGS. VISUAL CRITERIA IS TO BE USED IN CONJUCTION WITH SURFACE ROUGHNESS AS INDICATED. TITLE TUBE, PIPE, AND FITTING ITEM NUMBER SCHEME SPECIFICATION SHEET 3/9 REV AE www. valex. com SP-9200 JIS PIPE PART NUMBER MATRIX PXX PROCESS CODE: P1A P2A P2F = PER SP-9204 (101) = PER SP-9206 (201) - XX TYPE CODE: 0S = 316L SEAMLESS - XXXX 0008 0010 0015 0020 0025 0032 0040 0050 0065 0080 0090 0100 0125 0150 0200 0250 0300 0350 0400 0500 (XXX) 008 010 015 020 025 032 040 050 065 080 090 100 125 150 200 250 300 350 400 500 = 8A PIPE = 10A PIPE = 15A PIPE = 20A PIPE = 25A PIPE = 32A PIPE = 40A PIPE = 50A PIPE = 65A PIPE = 80A PIPE = 90A PIPE = 100A PIPE = 125A PIPE = 150A PIPE = 200A PIPE = 250A PIPE = 300A PIPE = 350A PIPE = 400A PIPE = 500A PIPE X END TYPE CODE: A = SQUARE B = 32. 5° BEVELED C = SQUARE, +10% / -15% WALL D = 32. 5° BEVELED, +10% / -15% WALL E = SQUARE, LOW Ti F = 32. 5° BEVELED, LOW Ti G = SQUARE, LOW Ti, +10% / -15% WALL H = 32. 5° BEVELED, LOW Ti, +10% / -15% WALL I = SQUARE, P1A BA J = SQUARE, X4 USED ONLY FOR 4-METER LENGTH PIPES - XXX SCHEDULE CODE: 6M PIPE 05S = JIS SCH. 10 X VISUAL CRITERIA: BLANK = PER SPEC A SUPERIOR B STANDARD C RELAXED X SURFACE ROUGHNESS: BLANK = PER SPEC (A)5 = 5 microinch Ra Max (A)7 = 7 microinch Ra Max (B)0 = 10 microinch Ra Max (C)0 = 10 microinch Ra SIZE CODE (SEE NOTE 2): 0W = 316L WELDED 1S = 304L SEAMLESS (JIS STD) = PER SP-9206 & I. D. /O. D. POLISH & ANODIC CLEAN (201) 1W = 304L WELDED (JIS STD) AS = 304 SEAMLESS AW = 304 WELDED BS = 316L SEAMLESS, VOD/VAR RS = 316L SEAMLESS RW = 316L WELDED P2I = PER SP-9206 & I. D. POLISH & ANODIC CLEAN (201) 4M PIPE 05 10 = JIS SCH. POLISH & ANODIC CLEAN (201) P4A P2H P4O P4R P2S = PER SP-9220 (401) = PER SP-9206 & ANODIC CLEAN (201) = PER SP-9220 & O. D. POLISH (401) = PER SP-9220 & I. D. /O. D. POLISH (401) = PER SP-9206 & I. D/O. D. POLISH (201) +UNSPECIFIED / -20% WALL K = 32. 5° BEVELED, +UNSPECIFIED / -20% WALL NOTES: 1. PROCESS CODES ARE NOT AVAILABLE FOR ALL TYPE CODES (MATERIAL) AND SIZES. PLEASE CONTACT VALEX SALES FOR ITEM NUMBER AVAILABILITY. SHADED COLUMNS USED ONLY FOR 4-METER LENGTH PIPES. VISUAL CRITERIA IS TO BE USED IN CONJUCTION WITH SURFACE ROUGHNESS AS INDICATED. USED FOR 20FOOT AND 6USED ONLY METER FOR 4-METER LENGTH LENGTH PIPES PIPES www. valex. com TITLE TUBE, PIPE, AND FITTING ITEM NUMBER SCHEME SPECIFICATION SP-9200 SHEET 4/9 REV AE JIS CO-AXIAL PIPE PART NUMBER MATRIX CPXX INNER PROCESS CODE: CP1A = PER SP-9204 (101) CP2A = PER SP-9206 (201) CP4A = PER SP-9220 (401) - XX OUTER JACKET: S = 316L SEAMLESS W = 316L WELDED AS = 304 SEAMLESS AW = 304 WELDED NS = 316L SEAMLESS (ASTM STD) RS = 316L SEAMLESS RW = 316L WELDED (JIS STD) 0S XX (or BLANK) = 316L Seamless - XXX 008 010 015 020 025 032 (XX) 08 10 15 20 25 32 = 8A PIPE = 10A PIPE = 15A PIPE = 20A PIPE = 25A PIPE = 32A PIPE X END TYPE CODE: A = SQUARE B = 32. 5° BEVELED C = SQUARE, +10% / -15% WALL D = 32. 5° BEVELED, +10% / -15% WALL J = SQUARE, X4 USED ONLY FOR 4-METER LENGTH PIPES - X VISUAL CRITERIA: BLANK = PER SPEC A = SUPERIOR B = STANDARD C = RELAXED X SURFACE ROUGHNESS: BLANK = PER SPEC (A)5 (A)7 = 5 microinch Ra Max = 7 microinch Ra Max INNER PIPE: SIZE CODE - INNER (SEE NOTE 2): 0W = 316L WELDED 1S = 304L SEAMLESS (JIS STD) 1W = 304L WELDED (JIS STD) NS = 316L SEAMLESS (ASTM STD) RS = 316L SEAMLESS RW = 316L WELDED (B)0 = 10 microinch Ra Max (C)0 = 10 microinch Ra USED FOR USED 20-FOOT ONLY FOR AND 64-METER METER LENGTH LENGTH PIPES PIPES +UNSPECIFIED / -20% WALL K = 32. 5° BEVELED, +UNSPECIFIED / -20% WALL NOTES: 1. PROCESS CODES ARE NOT AVAILABLE FOR ALL TYPE CODES (MATERIAL) AND SIZES. PLEASE CONTACT VALEX SALES FOR ITEM NUMBER AVAILABILITY. SHADED COLUMNS USED ONLY FOR 4-METER LENGTH PIPES. Single Wall Fitting Example 1: JE2S-150AT-B0 VALEX 401 SPEC, 90 DEG ELBOW (SHORT TYPE), 150A PIPE, SCHEDULE 10, SQUARED ENDS, STANDARD VISUALS, 10 Ra MAX . 25M = 1/4" O. D. X . 039" (1MM) WALL . 38 = 3/8" O. D. X . 039" (1MM) WALL . 5 = 1/2" O. D. [. . . ] TITLE www. valex. com TUBE, PIPE, AND FITTING ITEM NUMBER SCHEME SPECIFICATION SHEET REV. SP-9200 7/9 AE CFOS TUBE & PIPE FITTING PART NUMBER MATRIX XX PROCESS CODE (SEE NOTE 1) AF = 304 CF = 316L DF = 304L XXXXX CONFIGURATION CODE 2S = 90 DEG ELBOW, SHORT RADIUS 2L = 90 DEG ELBOW, LONG RADIUS 2WS = 90 DEG ELBOW, SHORT RADIUS, WLD 2WL = 90 DEG ELBOW, LONG RADIUS, WLD 2K = 45 DEG ELBOW 2KW = 45 DEG ELBOW, WLD 2SS = 90 DEG ELBOW, SHORT RADIUS, NO TANGENT 2LS = 90 DEG ELBOW, LONG RADIUS, NO TANGENT 2WSS = 90 DEG ELBOW, SHORT RADIUS, NO TANGENT, WLD 2WLS = 90 DEG ELBOW, LONG RADIUS, NO TANGENT, WLD 2KLS = 45 DEG ELBOW, LONG RADIUS, NO TANGENT 2KWLS = 45 DEG ELBOW, LONG RADIUS, NO TANGENT, WLD 7 = EQUAL TEE 7W = EQUAL TEE, WLD 7R = REDUCING TEE 7RS = REDUCING TEE, NO RISER 7RW = REDUCING TEE, WLD X SMLS 7RWW = REDUCING TEE, WLD X WLD 7S = REDUCING TEE, KS TYPE BASE 7SS = REDUCING TEE, KS TYPE BASE, NO RISER 16 = END CAP 16W = END CAP, WLD 31 = CONC REDUCER 31W = CONC REDUCER, WLD X SMLS 31WW = CONC REDUCER, WLD X WLD 31FF = CONC REDUCER, FORMED, NO TANGENT 31FS = CONC REDUCER, NO TANGENT LARGE, SMALL TANGENT SMLS 31SF = CONC REDUCER, LARGE TANGENT SMLS, NO TANGENT SMALL 31FW = CONC REDUCER, NO TANGENT LARGE, SMALL TANGENT WLD 31WF = CONC REDUCER, LARGE TANGENT WLD, NO TANGENT SMALL 33 = CONC REDUCER, CAP TYPE 33FF = CAP REDUCER, FORMED, NO TANGENT 33FS = CAP REDUCER, NO TANGENT LARGE, SMALL TANGENT SMLS 33SF = CAP REDUCER, LARGE TANGENT SMLS, NO TANGENT SMALL 33FW = CAP REDUCER, NO TANGENT LARGE, SMALL TANGENT WLD 33WF = CAP REDUCER, LARGE TANGENT WLD, NO TANGENT SMALL ASTM TUBE 04 = . 25" DIA 06 = . 375" DIA 08 = . 5" DIA 12 = . 75" DIA 16 = 1" DIA 24 = 1. 5" DIA 32 = 2" DIA 40 = 2. 5" DIA 48 = 3" DIA 64 = 4" DIA 96 = 6" DIA - XX SIZE CODE (SEE NOTE 2) JIS & NPS PIPE 70 = DN 15 (NPS 1/2 / JIS 15A) 71 = DN 20 (NPS 3/4 / JIS 20A) 72 = DN 25 (NPS 1 / JIS 25A) 73 = DN 32 (NPS 1-1/4 / JIS 32A) 74 = DN 40 (NPS 1-1/2 / JIS 40A) 75 = DN 50 (NPS 2 / JIS 50A) 76 = DN 65 (NPS 2-1/2 / JIS 65A) 77 = DN 80 (NPS 3 / JIS 80A) 78 = DN 90 (NPS 3-1/2 / JIS 90A) 79 = DN 100 (NPS 4 / JIS 100A) 80 = DN 125 (NPS 5 / JIS 125A) 81 = DN 150 (NPS 6 / JIS 150A) 82 = DN 200 (NPS 8 / JIS 200A) 83 = DN 250 (NPS 10 / JIS 250A) 84 = DN 300 (NPS 12 / JIS 300A) 85 = DN 350 (NPS 14 / JIS 350A) 86 = DN 400 (NPS 16 / JIS 400A) 87 = DN 450 (NPS 18 / JIS 450A) 88 = DN 500 (NPS 20 / JIS 500A) 89 = DN 500 (NPS 22 / JIS 550A) 90 = DN 600 (NPS 24 / JIS 600A) X END CODE: ASTM TUBE: BLANK = SQUARE JIS PIPE: A = SQUARE B = BEVELED J = SQUARE, -20% WALL K = BEVELED, -20% WALL NPS PIPE: L = SQUARE M = BEVELED N = SQUARE, -20% WALL P = BEVELED, -20% WALL X WALL CODE: ASTM TUBE: A = . 028" WALL B = . 035" WALL C = . 039" WALL D = . 049" WALL E = . 058" WALL F = . 065" WALL G = . 083" WALL H = . 095" WALL J = . 109" WALL K = . 120" WALL L = . 188" WALL M = . 228" WALL JIS & NPS PIPE: BLANK = 5S T = 10S U = 20S V = 40S W = 80S (XX) USED ONLY FOR REDUCING FITTINGS -X FINISH CODE 1 = AP 2 = BA 3 = BA40 Fitting Example 1: AF7RWW-82MT75MT-2 VALEX CFOS SPEC, REDUCING TEE, NPS 8" X NPS 2" PIPE, SCHEDULE 10, BEVELED ENDS, BA GRADE Fitting Example 2: CF2KW-79M-3 VALEX CFOS SPEC, 45° ELBOW, NPS 4" PIPE, SCHEDULE 5 , BA GRADE, 40 Ra NOTES: 1. SHADED COLUMNS USED ONLY FOR REDUCING FITTINGS. PROCESS CODES ARE NOT AVAILABLE FOR ALL TYPE CODES (MATERIAL) AND SIZES. PLEASE CONTACT VALEX SALES FOR ITEM NUMBER AVAILABILITY. [. . . ]