User manual VAPORETTO CLASSIC 65

[. . . ] The optional accessories are on sale at all the best domestic appliance retailers, an Authorised Polti Service Centre or online at www. Com and in good appliance shops you will find a wide range of accessories to increase the performance and the practical applications of your appliances to make home cleaning even easier. To check the compatibility of an accessory with your appliance, search the code PAEUXXXX/PFEUXXXX listed next to each accessory on page 3. If the accessory code you wish to buy is not listed in this manual, please contact our Customer Service team for more information. [. . . ] 5 Press the boiler switch and the accessories switch, which will light up (6). 6 Wait for the boiler switch to turn off. WARNING: if steam is escaping from the safety cap, switch the appliance off and unplug it from the mains. Wait for one hour for the appliance to cool before unscrewing the cap and screwing it back on. WARNING: Never leave the filling bottle or the funnel resting on the mouth of the boiler, with the product connected to the power supply, since this could cause burns. The Vaporetto accessories can be connected directly to the handle of the steam hose or extension tubes as follows: • Move the locking button on the accessory to the OPEN position (10). €¢ Attach the required accessory to the hand gun or to the extension tube (10). €¢ Move the locking button back to the position CLOSED. €¢ Check that the locking button has engaged and the accessory is fully connected. CLEANING FLOORS Before using the appliance on delicate surfaces, ensure that the part in contact with the surface is free from foreign bodies that could cause scratches. 1 Make sure that Chapter 1 has been followed and connect | 22 | PRELIMINARE VT CLASSIC55_65 - M0S11215 - 1P06_vers7:UNICO 17/07/2015 14. 23 Pagina 23 Warning: Do not use the appliance without the cloth. WARNING: For additional safety, test steam delivery on a hidden part, leave the steamed part to dry to ensure that no changes in colour or deformations have occurred. CLEANING RUGS AND CARPETS WARNING: Before cleaning fabrics with steam, consult the manufacturer’s instructions and always carry out a test on a hidden part or on a sample of the material. Allow the steamed part to dry to make sure that no changes in colour or deformations have occurred. 1 Make sure that Chapter 1 has been followed and connect the accessories as indicated in Chapter 2. 2 Connect the extension tubes to the steam hose and the floor brush to the extension tubes. 3 Adjust the intensity of the steam by turning the adjustment knob (9); for this type of surface we recommend Level 3 of steam. 4 Deactivate the steam lock (8) and continue with steam delivery, pressing the steam trigger on the handle of the steam hose (7). 5 Pass the brush without cloth over the surface to bring dirt to the surface. 6 Attach the supplied cloth to the floor brush, locking it in place with the special lever hooks. 7 Go back over the surface to collect the dirt. [. . . ] Lubricate the seals with silicone grease or Vaseline, or alternatively with a small amount of vegetable oil. Turn the blocking button to the correct position as indicated in Chapter 2. The blocking button is not in the correct position. 23 Pagina 26 WARRANTY This appliance is for domestic use only and is guaranteed for two years from the date of purchase against any defects present at the time the goods are handed over; the date of purchase must be proven via a proof of purchase document valid for tax purposes and issued by the seller. [. . . ]