User manual VDO CYCLECOMPUTING C15

[. . . ] English Deutsch Français Italiano Español page Seite page 1-20 21-40 41-60 GB C15 D C15 F C15 I C15 E C15 NL C15 pagine 61-80 pagina 81-100 Nederlands pagina 101-120 ETRTO 47-305 47-406 34-540 47-507 23-571 40-559 44-559 47-559 50-559 54-559 57-559 37-590 20-571 16x1, 75 20x1, 75 24x1 3/8 24x1, 75 26x1 26x1, 5 26x1, 6 26x1, 75 26x1, 9 26x2, 00 26x2, 125 26x1 3/8 26x3/4 WS in mm KMH 1272 1590 1948 1907 1973 2026 2051 2070 2089 2114 2133 2105 1954 WS in inch MPH 50, 1 62, 6 76, 7 75, 1 77, 7 79, 8 80, 7 81, 5 82, 2 83, 2 84, 0 82, 9 76, 9 ETRTO 32-630 40-622 47-622 40-635 37-622 18-622 20-622 23-622 25-622 28-622 32-622 37-622 40-622 27x1 1/4 28x1, 5 28x1, 75 28x1 1/2 28x1 3/8 700x18C 700x20C 700x23C 700x25C 700x28C 700x32C 700x37C 700x40C WS in mm KMH 2199 2224 2268 2265 2205 2102 2114 2133 2146 2149 2174 2205 2224 WS in inch MPH 86, 6 87, 6 89, 3 89, 2 86, 8 82, 8 83, 2 84, 0 84, 5 84, 6 85, 6 86, 8 87, 6 INSTALLATION AND OPERATION MANUAL - VDO CYTEC C 15 GB C 15 Preface Thank you for buying a VDO CYTEC bicycle computer. The more familiar you get with this model, the more enjoyable your trips are going to be. Please read thoroughly all the information provided in this manual. You are getting important and useful hints for operation to make you fully benefit from all the technical features of your VDO CYTEC bicycle computer. [. . . ] Watch out: Pressing the MODE 2 key for 5 sec. without TCNT data being displayed probably resets your TRP-RID-AVS-MAX data to zero. 8 10. Manual stop-watch STP Your VDO CYTEC C 15 features a manual stop-watch. With information STP being displayed, you may operate your stop-watch with the SS-button. GB C 15 Watch out: Pressing the MODE 2 button for 5 sec. without STP data being displayed resets your TRP-AVS-RID-MAX data to zero. SS START/STOP SS press when STP is displayed = starting the stop-watch SS press again = interrupt the stop-watch SS press again = stop watch continues 11. Reset Your VDO CYTEC C 15 features a FREEZE-function. Using this function, as you pass the finish line "freezes" your screen and further impulses are not processed. For triathletes, road racers and for interval-exercise the FREEZE-function provides precise data, i. e. , when passing the finish line, distance, time and average speed values that are being stored during use. 9 GB C 15 Activating the FREEZE-function The FREEZE-function can be activated from any information displayed by simultaneously pressing MODE 1 and MODE 2 buttons for 0. 1 sec. Having activated the FREEZE-function, the letters FRE show up in the upper LCD-segment. Your computer does not process any further impulses, only the clock CLK keeps going. Interrogating information in FREEZE-function Any information can be accessed when you are in FREEZE-mode. Deactivating of FREEZE-function - returning to normal modes The FREEZE-function is deactivated by simultaneously pressing MODE 1 and MODE 2 buttons for 0. 1 sec. The computer will revert back to normal mode again and speed impulses will be processed. Comparison of current and average speed Your VDO CYTEC C 15 compares your current speed with your average speed. The outcome of this comparison can be seen in your display by the use of symbols. No matter which information is currently displayed, this data keeps you updated on the relation of your current speed and your average speed. MODE 1 +MODE 2 to aktivate to deactivate Your current speed is faster than your average speed. Accuracy +/- 1 KMH/MPH 10 You are currently riding as fast as your average speed. Accuracy +/- 1 KMH/MPH Your current speed is slower than your average speed. Set-up mode Your VDO CYTEC C 15 features the following set-up procedures wheelsize 1 = WS1 wheelsize 2 = WS2 clock = CLK odometers = ODO1, ODO2 Trip Counter=TCNT set-up starts out of TRP in display set-up starts out of TRP in display set-up starts out of CLK in display set-up starts out of ODO1, ODO2 in display set up starts out of TCNT in display GB C 15 No matter which set-up mode is used for your VDO CYTEC , the procedure is the same. You can start the set-up mode for a certain display by pressing the MODE 1 button for 5 sec. With this MODE button you may also exit the set-up mode at any time. Once the set-up mode is activated, MODE 1 and MODE 2 buttons are covered with following instructions: MODE1 MODE2 changing from one enter display to the next enter display selection of figure to be entered, changing from KMH to MPH mode 14. [. . . ] Resetting information to zero The following information may be reset to zero with your VDO CYTEC C 15. TRP-RID-AVS-MAX TCNT TOT STP These information here is simultaneously reset to zero. This information is singly reset to zero. This information is singly reset to zero. [. . . ]