User manual VDO DAYTON CD 1737 X,MV

[. . . ] 8 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PREVENTIVE MAINTENANCE . . . . . . . . . . . . . . . 8 CONTENT PAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . [. . . ] J) Press the REL button and open the front panel. Insert both removal keys into the holes on the front of the set until they lock. Pull out the radio. Audio In You can connect external audio equipment via the labelled AUX-in RCA cables. Red wire for Right Channel input White wire for Left Channel input. Replacing the Fuse (fig. The new fuse must be of exactly this value and type otherwise the set will not be adequately protected. Ignoring this procedure may lead to damage to the set, which will invalidate the guarantee. MOUNTING Metal Sleeve (fig. F and G ) Install the metal sleeve in the dashboard. For optimal performance of the CD player, the metal sleeve should be positioned horizontally (between -10° and +30°). Fix metal sleeve into place by pressing the metal tags outwards using a screwdriver. Interference Suppression Most modern cars have sufficient interference suppression. If you experience interference generated by the car, consult your dealer. Connecting the Radio (fig. Insert power supply connector A' into socket A. Insert the front into the radio until it clicks into position. Close the front until it clicks into position. Note 1: If you hear a warning signal, the front is not properly replaced!Note 2: To ensure good connection between the set and the detachable unit, it is advisable to clean frequently the connections with a cotton swab from time to time! 14 Note 3: Do not touch the electrical contacts when removing or replacing the front panel! Bass (only when DSP is off) To change the enhancement of low frequency. Press the SEL MENU knob to select the sound control Bass (BAS). Turn the VOL knob to adjust the level of bass enhancement. GENERAL OPERATION Switching On/Off Press button to switch the set on or off. Treble (only when DSP is off) To change the enhancement of high frequency. Press the SEL MENU knob to select the sound control Treble (TRE). Turn the VOL knob to adjust the amount of treble enhancement. Setting the Start-up Volume VOL LAST or VOL ADJ mode In this mode the start-up volume can be set the radio will have when it is switched on. Long press the SEL MENU knob to select the special functions mode. Turn the VOL knob to VOL LAST to set the radio to store the volume as it was when the radio was turned off, or 3. Turn the knob to VOL ADJ to adjust the startup volume with the VOL knob to a comfortable level. [. . . ] Press the "1"/PLAY (PLAY/PAUSE) button to pause the track being played. Press the "1"/PLAY (PLAY/PAUSE) button again to or resume playing. File Selection File Advance 1. Short press the or button to skip to the next file, forward or backward. Fast Forward / Review 1. Long press the or button to skip to fast forward or backward the file, once it reaches the next file the fast forward function is terminated. Repeating a File To continually repeat the current track. [. . . ]