User manual VDO DAYTON MM 2700

[. . . ] Use only a damp cloth. Features With its standard RCA/"cinch" connections, the MM 2700 is primarily designed for connection to entertainment AV sources (DVD players, TV tuners, games consoles, etc. ). It is also possible to use the unit in connection with the navigation computers PC54xx and higher (CA 1255 adapter cable required). 7-inch 16:9 TFT-LCD colour monitor Resolution: 480 x 234 pixels (horizontal x vertical) PAL/NTSC compatible (automatic detection) OSD menu Simple "Plug&Play" power supply via cigarette lighter AV connection via cinch/RCA (video and audio L/R) 4 different display modes Picture-mirror function (horizontal and vertical) Built-in loudspeaker and infrared receiver Stereo headphone output at the front of the monitor Operation at monitor or via supplied IR remote control 3 English OPERATION Control elements on the monitor DISP MENU 1 2 3 45 6 7 8 2 8 . Increase volume In OSD menu items: increase set value 3 DISP . [. . . ] Observe automotive industry quality standards and the relevant local statutory regulations. Never drill into supporting or safety-relevant body parts. It is essential to observe the following when installing components in the passenger compartment: Ensure that the driver has a clear all-round view. Increased risk of injury in the event of an accident. Do not install components in the inflation range of the airbag or in areas where the head may knock against them. Only install the unit in vehicles with a 12-V on-board voltage; connect negative pole to earth. heavy goods vehicles, buses) results in a risk of malfunction, damage and fire. Do not damage safety system wiring (airbag etc. ). (Lines are normally specially marked, for example by labels). Do not use test lamps to test the voltage, since excessively high currents could damage/ destroy electronic components. Insulate all solder points with shrink hose or insulating tape. Fit toothed washers at earth connections to the vehicle body. If necessary, remove paint and dirt beforehand. Subsequently, protect bare metal against corrosion. In order to ensure perfect installation, use only the original components supplied. The use of non-authorised components may result in malfunction. Do not install the unit in positions where it is exposed to high temperatures, dust, dirt or excessive vibration (e. g. due to direct sunlight or heating vents). Scope of delivery Check the scope of delivery for completeness before starting work. The complete installation kit contains: 1 MM 2700 with 5 m connecting cable 1 Installation bracket for headrest integration + 1 disassembly tool 1 Infrared remote control 1 Stereo headphone (3. 5-mm jack) 1 Installation and operating instructions Report faulty components to the Service department and notify any damage to the deliverer (forwarder, package service, post office). Technical data, design and scope of delivery may vary slightly due to product updating. 7 English INSTALLATION INSTRUCTIONS Connection 1. Connect the mini-DIN plug of the connecting cable to the AV1 socket at the rear of the monitor. Connect the power-supply plug into a 12-V cigarette-lighter socket. Connect the RCA/cinch plug to the video source (yellow: video; red: audio R; white: audio L). s Permanent installation For a permanent installation, the plug for the cigarette lighter can be removed and the monitor can be supplied with power via the connecting cables (red and black). Cable colour Red Black Connection +12 V ignition positive / accessory contact Battery negative / earth Before starting work, disconnect the earth lead from the negative terminal of the vehicle battery in order to prevent short circuits. At the same time, follow the vehicle manufacturer's safety instructions (alarm system, airbag, immobiliser, radio coding, etc. ). A A A The fuse of the red connecting cable (+ 12 V) must not be removed. [. . . ] · Use adapter cable CA 1255 to connect the MM 2700 directly to the navigation computer (PC 54xx and above). · Change the TINT set value via the OSD menu of the MM 2700. in green" setting in the "Settings" menu of the navigation computer. (Please contact your authorised dealer if you have any further queries). [. . . ]