User manual VDO DAYTON MS 5200 RD

[. . . ] PC 5200 Owner's manual Mode d'emploi Bedienungsanleitung Gebruiksaanwijzing Istruzioni d'uso Instrucciones de manejo Bruksanvisning Betjeningsvejledning Käyttöohje www. vdodayton. com Suomi Dansk Svenska Español Italiano Nederlands Deutsch Français English Contents Contents General information . Functions of your navigation system Maintenance and care . TMC traffic information Dynamic route planning The "Info" menu . 11 11 12 16 17 20 25 28 29 29 30 Settings . [. . . ] : The last direction is repeated and/or updated driving directions are provided. If the symbol l flashes in the status line, the audible information is switched off. Press the V or W button on the remote control to activate the information again. Planning an alternative route During guidance it is possible for the navigation system to plan an alternative route to cover a distance which you can select. if you wish to avoid stationary traffic, or if you do not agree with the current routing. The alternative route will be calculated for the specified distance from the vehicle's current location. : The system now displays the distance for which the alternative route is to be planned. Select the value after "Distance:" and press the OK key. Set the value using the cursor buttons and press the OK button. Select the option "Yes" if you want to transfer the entered value and start the planning of the alternative route. Select "No" if you want to cancel the planning of an alternative route. Screen displays Four types of screen display are available for guidance: Symbols: Graphic display of the "turn-now" advice Map: Map display of the planned route. The arrow shows the current vehicle position and the combination of both display types (split screen): Map / symbols Map / trip computer Switching display type By pressing the NAVIGATION button, you can switch between the various display types: k 22 Symbol display Navigation The symbol display provides the following information: 1 Distance to destination or to next via point. 2 Directional arrow (linear distance) to destination or to next via point. 3 Menu title* 4 Distance to the next change of direction. 5 Name of the street to turn into (next change of direction). 6 Directional arrow and, if necessary, early warning for next junction or crossing. Detailed turn-now advice appears as soon as you approach a junction or crossing. In addition, turn-offs are announced with audible messages. 7 Current location of the vehicle: road name, town name and area if available in the selected navigation database. 8 Status line* * Configurable, refer to the "Settings -> Screen configuration" section, page 32. Menu options in the symbol display Press the OK button to display a menu with the following options: Return: Returns to the Navigation menu. Local detour: Upon request, plans a detour if there is a road obstruction in less than 50 km on the planned route. This option is only displayed if dynamic route planning is deactivated and TMC traffic information is activated. [. . . ] Searching in travel info Select "Travel info" in the Start Menu. : The overview of travel info products is displayed. Select the required product from the list. Select the following search options from the list: Search at destination: Displays the search screen for facilities in the vicinity of the destination. [. . . ]