User manual VDO DAYTON MS 5500

[. . . ] CONTENTS GENERAL INFORMATION Explanation of symbols 4 For your safety! 4 Important the correct system software! 6 Maintenance and care 6 Functions of your navigation system 6 Range of functions 6 System expansion 7 Distance indications 7 Operating restrictions (country-specific) 7 GPS reception 7 Start-up characteristics 7 Automatic route re-calculation 7 Areas with limited road information 8 Switching on / off 8 Remote control 8 Stand-by 10 Inserting/changing the map DVD/CD 10 C-IQ - Your key to map, traffic and travel information 11 Activation options 11 Reading the Navi ID 12 Code input 12 C-IQ SMS list 13 My C-IQ 13 Prepaid C-IQ 13 Preview 14 Configuration 14 C-IQ Service 15 Screen menu types 15 Popup menu 15 Pull-down menu (functions list) 16 List screen 16 Settings adjusting the navigation system 17 Day / night colours 17 Screen configuration 18 Message selection 19 Route criteria 19 Dynamic route 20 Speed warning 21 Remote control 22 Favourite function 22 General Settings 23 Language 23 Audible settings 23 Measuring units 24 1 CONTENTS Device configuration Shut-Down timer System configuration Info Points Default settings 25 26 26 27 28 NAVIGATION Destination input Direct address input Function "List" Special destinations Points of interest Junction All streets (Quick Access) Address book (see also chapter Address book) Destination map Via points (intermediate destinations) Stop guidance Travel info Points of interest Travel symbols Screen displays Guidance display Map display Split screen Guidance in non-digitised areas Guidance in partly digitised areas Audible messages Plan Alternative Route TMC traffic information Pay TMC In the map display On the guidance display TMC detail information Graphic display of a road obstruction Bypassing a road obstruction Concurrent dynamic route guidance TMC symbols "Info" menu The address book Store addresses Delete address Delete previous destinations Store vehicle position in address book Retrieve address from the destination memory 30 30 31 31 31 32 32 33 33 34 35 35 36 37 38 38 39 39 40 40 40 40 41 42 42 43 43 44 44 45 46 47 48 48 48 48 49 49 2 CONTENTS TELEPHONE CI 3000 CIX 3000 Blue Linking of mobile phone with CIX 3000 Blue Driver software for the CI 3000 Loading phone book Telephone functions Calling Volume of call Dialling Dialling via numeric buttons Call list Calls from the phone book Retrieving an entry from the phone book Deleting an entry Adding an entry (only on SIM card) SMS (Short Message Service) Receiving SMS messages Reading SMS messages Writing SMS messages Sending SMS messages Direct dialling of displayed phone numbers Telephone Settings Phone Info Phone book Storing a mailbox no SW download Bluetooth 50 50 51 51 52 53 54 54 54 54 54 55 55 56 56 56 57 57 58 58 58 59 59 59 60 60 60 USEFUL EXTRAS Trip computer 61 Emergency 62 Entering an assistance number 63 TROUBLESHOOTING Troubleshooting 64 3 GENERAL INFORMATION Explanation of symbols The following symbols are used in this manual: !This symbol is used to indicate safety instructions and warnings. These contain important information for the safe use of the unit. [. . . ] Then choose a smaller scale to mark the destination accurately with the cursor. Destinations which are not in the digitised map area can also be selected. Ensure that correct side of the road is selected when targeting a destination on motorways. 33 NAVIGATION Co-ordinates u Select "Destination map" under "Navigation". The map with the cursor will be displayed. Press the OK button. u Select "Co-ordinates", and press the OK button. u Select "Longitude" or "Latitude", press the OK button. u Define each digit with the cursor buttons on the remote control and confirm with OK. Should you wish to skip a digit, press the OK button. u Select "Set co-ordinates", press the OK button. u To start navigation press the OK button, select "Return", select "Guidance" and press the OK button again. Via points (intermediate destinations) Should you wish to drive to other locations on your way to your destination, these can be entered as via points. The navigation system then plans the route to include the via points according to their order of entry before the destination address is reached. Once a via point has been passed it is automatically deleted from the list. A maximum of 25 via points can be stored. u In the "Navigation" menu select the function "Via points". You can enter the via points in the same way as destination addresses (see above sections). Use "Return" to return to the "Navigation" menu. If a via point is active, all route information such as distance or travel time relates to that via point. 34 NAVIGATION Storing a via point u Select "Store via point" and press the OK button. Deleting via points u Select "Delete via point" and press the OK button. A list of the stored via points appears. u Select the via point to be deleted and press the OK button. A popup menu with the entry appears. u Select "Delete" and press the OK button, if you wish to delete the displayed via point from memory. u Select "Quit" and press the OK button, if you do not wish to delete it. Should the memory already contain 25 via points, a note is displayed stating that no further via points can be stored. Should you wish to enter a new via point, one of the previously entered via points must be deleted. t If all via points are to be deleted, it is possible to delete the destination along with all via points under "Navigation". Stop guidance If you are in one of the guidance screens, guidance can be stopped at any time. u Press the OK button, select the option "Stop guidance", and press the OK button. Travel info In the start menu, the button "Travel info" can be selected, if this information is available on the DVD/CD, and if you have activated at least one provider of travel guide information (see also chapter C-IQ - your key to map, traffic and travel information). This button can be used to select 35 NAVIGATION this or any other provider of travel guide information. Following this define the search option. [. . . ] Addresses cannot be stored in the address book Guidance is not accurate. Activate the respective information in the "Screen settings" menu under "Setting" for "Status line right" and "Status line left". No satellite signal reception. Ensure that the GPS antenna is not obscured by any objects. The CD may be dirty: Clean the CD with a special CD cleaning fluid. Set the correct time zone in the "Settings" menu, function "Date/time". Address book full: Delete one or more entries from the address book that are no longer required. An accuracy of 50m falls within the specified tolerance limits: Please contact an authorised dealer if greater inaccuracies repeatedly occur. 65 TROUBLESHOOTING Symptoms Displayed position does not correspond to actual vehicle position. Possible cause / remedy Problems with GPS reception persist. [. . . ]