User manual VDO DAYTON PN 2050

[. . . ] Contents Contents 25 General Instructions . 26 Safety Advice and Important Information. 48 26 General Instructions Safety Advice and Important Information Before you start to mount and use this navigation system, please familiarise yourself with its various components and functions. Furthermore, please read through the safety instructions carefully to avoid causing injury to yourself and/or other road users. [. . . ] TMC is switched On, the traffic information is known and send by the provider, the information can be received. TMC Status and Quality When you set TMC On and there is no reception, a red checkmark is shown. When you receive TMC, the name of the provider is shown green in the status bar. If TMC is switched Off, no provider is shown and a narrow line is visible. When TMC is switched On and you receive traffic information, the status bar also visualises the delay time. For example caused by traffic jam or road works. This is indicated by the colour of the hourglass: Red There is TMC information and delay time Green There is TMC information but no delay time Grey TMC is not available or switched off (only for traffic product version) When TMC is switched On and there is a traffic jam on your route, a pop up icon appears in the left corner on the map display screen. Tap this icon and a list of detailed information appears. Remote Control Remote control RCS 5100 (optional) 39 With the remote control placed on your steering wheel, you can easily operate the navigation system while driving. You have to switch the mode switch (3) to Navigation. 1 2 3 4 5 6 7 If you press this button briefly the voice message will repeat itself. Pressing it longer the alternative route planning Menue is shown. With the cursor keys you can navigate in the menus. If in Map View, Cursor left/right will zoom the map. By pressing this button you confirm a selection. Press this button briefly and you see the Map display. If you press longer you will open the Toolbar. Pressing this button decreases the volume of the navigation voice advice. In setting screens with sliders it will decrease the selected slider value. Pressing this button increases the volume of the navigation voice advice. In setting screens with sliders it will increase the selected slider value. 40 Navigation Navigation The purpose of the navigation system is to guide you from your present location to your desired destination. The navigation function automatically determines your present location using the GPS signal. You simply have to enter your destination and the navigation process starts with spoken and visual instructions. The following section explains all the steps you need to perform: from entering the address to the arrival at your destination. Enter your destination First select your destination. [. . . ] Restart the navigation system by pressing the power button. System doesn't start, screen Make sure that the battery is fully charged and/or that the remains blank. If you are using the DC cable, check that the plug is securely and correctly connected to the cigarette lighter. The system shuts itself down In the case of extremely low or high temperatures, the sysafter a certain time in opera- tem will temporarily shut down to prevent itself from being damaged. [. . . ]