User manual VDO DAYTON PN 6000

[. . . ] PN 4000 PN 6000 User Manual Content Content 53 General advice . 54 Safety advice and important information . 71 Change route ­ avoid traffic jams . 74 Position & speed/Select location. [. . . ] The maximum length of the security code is 16 digits. You can use this function to protect the personal data (addresses) that is stored on your navigation device. Make a note of the password and store it in a safe place. Use this button to delete a defined password. 76 Bluetooth settings Settings Bluetooth functions such as handsfree calling and pairing can only be used when the navigation system is placed in the MA3000TB Bluetooth cradle. If the navigation system is not placed in the cradle, the Bluetooth functions are not available and the Bluetooth buttons on the screen are deactivated. The Bluetooth settings can also be called up from the Main menu via the Multimedia button. First tap the Multimedia button, then the Bluetooth button. Bluetooth on/off: Tap this button to turn the Bluetooth functions on or off. If the Bluetooth functions are off, handsfree calling via the navigation system is inactive, even if the navigation system is in the cradle. Auto connect (on/off): Tap this button to activate/deactivate auto connect. When the navigation system is placed in the Bluetooth cradle, the Bluetooth cradle can automatically attempt to connect to the most recently connected Bluetooth phone. When this phone is in close range, the Bluetooth cradle will set up a connection to the phone. Handsfree calling is available when the connection has been established. If Auto connect is deactivated, the most recently used Bluetooth phone must be connected manually. To do this, tap the Connect button in the Bluetooth menu. Start pairing: Before the Bluetooth cradle can be connected to another Bluetooth device, both devices must be paired. Pairing allows further Bluetooth devices to access the handsfree calling function of the Bluetooth cradle. The Bluetooth cradle is displayed as "MA3000TB" on your mobile phone when the mobile phone searches for the Bluetooth cradle. Pairing ends as soon as pairing is successful or after three minutes if the pairing fails. Provided the Bluetooth cradle is available for pairing, wireless phones with activated Bluetooth can search for the handsfree function and set up a connection. For further information on pairing, please read the user guide belonging to your Bluetooth phone. Settings 77 As soon as the Bluetooth phone starts to pair, it requests a PIN code. Caution: The cradle can remember up to five paired Bluetooth devices. [. . . ] In this case, you will need an external GPS aerial (available from accessory dealers, article no. Ensure that the GPS aerial on the top of the navigation system is not obstructed by other objects. Attempt to adjust the navigation system. Troubleshooting Problem No GPS signal in vehicle No GPS signal GPS signal poor The navigation system no longer responds If the navigation system stops responding to to finger taps or does not switch off your entries, you can press the reset button on the underside of the device (e. g. with a straightened-out paper clip or a pencil). [. . . ]