User manual VDO DAYTON RM 8204

[. . . ] Owner's manual and mounting instruction Mode d'emploi et manuel d'installation Bedienungs- und Einbauanleitung Istruzioni d'uso e d'installazione Gebruiksaanwijzing en inbouwhandleiding Instrucciones de manejo y de montaje Betjeningsvejledning og monteringsanvisning Dansk Español Italiano Nederlands Deutsch RM 8204 Français English Addendum English Changes against owners manual: 1. Instead of the function "FM 123" "FM MEMO" is available. This mode enables the storage of all receivable stations in alphabetic order. The CD-Changer options "Scan" and "Repeat" are NOT available. Français Modifications par rapport au mode d'emploi: 1. [. . . ] Once the end of a CD has been reached, playback of the next CD is commenced. CDs absent from the magazine are ignored automatically. Press the y or x button on the remote control, or the 2 or 8 button on the MM 5600 to play the previous / next track on the CD. If you press the y button on the remote control or the 2 button on the MM 5600 after the first 10 seconds of a track have been played, the CD changer starts playing it again from the beginning. Press and hold the y or x button on the remote control, or the 2 or 8 button on the MM 5600. Once the required point on the CD has been attained, briefly press the y or x button on the remote control, or the 2 or 8 button on the MM 5600. Playback is continued at the normal speed. Previous / next track (audio CD and MP3) Fast forward / rewind : 14 Operation Open the "CDC" menu. Select "INTRO SCAN" and press OK twice to activate this function. Each track of the currently loaded CD or currently selected directory (MP3) is played for about 10 seconds. Press the ESC button to listen in full to the track currently being introduced. Introductory playback - SCAN : Random playback Open the "CDC" menu. Select "ON" to activate the random playback function. Select "OFF" to deactivate the random playback function. Press OK to confirm your setting. Repeat function Open the "CDC" menu. Select "REPEAT TRACK" and press OK. Select "ON" to activate the repeat function. Select "OFF" to deactivate the repeat function. Press OK to confirm your setting. Operation DVD changer (accessory) 15 If, instead of a CD changer, a DVD changer is connected to the RM 8204, selecting DVDC in the main menu effects a switchover to playback via this device. The DVD changer's basic functions (start, stop, search etc. ) can be controlled via the RC 5400 or the MM 5600 as described in the section on the CD changer. If the hand brake has been applied, the DVD changer's video signal is output automatically on the screen. While the vehicle is moving, the video signal remains disabled for safety reasons, although the audio signal remains effective. To permit full use of the DVD changer's functionality, this device should be operated via its own remote control (for this purpose, an external infrared receiver must be connected to the DVD changer). The DVD changer needs to be activated in the SETUP menu (refer to configuration of the CD / DVD changer). AUX input (audio / video source) Select "AUX" in the main menu in order to set the AUX input as the source. [. . . ] s Video input (CVBS signal): Connect the video output of the AV source or DVD changer to the yellow socket on the unit's front panel. Video signals are output to the screen only if the hand brake signal has been routed properly (see the next page). k 22 Installation instructions s Audio input to chamber D2 (adapter cable accessories), Fig. 7: Connect the right-hand channel of the AV source's audio output to the adapter cable's red socket. [. . . ]