User manual VDO DAYTON RV 5100

[. . . ] Never drill into car parts which are load-bearing or are important for safety Installation may only be carried out by trained specialists!Observe all quality standards of the automobile industry!reasons! ATTENTION: A A Refer to the owner's manual for details on connecting the other units, then make connections correctly. [. . . ] Pass camera cable through into the vehicle using the rubber gasket. Do not bend cable around sharp edges. Self-tapping screw 4 x 10 Spring washer M4 Mounting bracket Adhesive tape Protective paper 5. Mount the camera and the sun visor to the bracket using the 6 supplied screws. Screws M3 x 8 Sun visor Spring washer M3 Screw M3 x 6 6 Connecting the camera The camera can be connected to your Multimedia System in different ways: 1. Direct connection to the Navigation Computer, ill. 1 For direct connection of the camera to the navigation computer the adaptor cable MA 1200 (accessory) is required. Connect the Mini DIN plug of the camera to the Mini DIN socket of the MA 1200. Activate the "Rear view camera connected" option in the "System Settings ­> Video configuration" menu of the navigation computer. 2. In combination with TV Tuner TV 5100, ill. 2 Connect the Mini DIN plug of the camera to the camera input of the TV 5100. Connect the yellow lead of the TV 5100 to the reversing signal of the vehicle to ensure automatic switch over to the camera when backing up. 3. In combination with Multimedia Interface Box MI 5000, ill. 3 Connect the Mini DIN plug of the camera to the camera input of the MI 5000. Activate the "Multimedia box connected" option in the "System Settings ­> Video configuration" menu of the navigation computer. 4. In combination with TV Tuner TV 5100 and MI Box MI 5000, ill. [. . . ] 270, 000 pixel (CCIR) Horizontal resolution: . - 10° Celsius to + 60° Celsius Dimensions: . 70 mm x 57 mm x 44 mm (W x D x H) Weight: . [. . . ]