User manual VDO HVAC BLOWER AND FAN SYSTEMS V3.0 BROCHURE

[. . . ] _ Flush mount possibility _ LED Illumination _ High reliability Picture: Tachometer without Display Concept Housing Bezel Lens Dial Pointer Illumination Warning LED Mounting Connection PC; flame retarding (UL94) PC or ABS; several colors and shapes (see table) PMMA; double lens backlit; different colors (see table) backlit, white on black dials; red on white dials Dial: LED amber (605nm) Pointer: LED red (632nm) red (632nm), programmable spinlock Nut; locking height 0, 5mm ­ 20mm, optional Studs and Bracket; locking height 2 ­ 13mm 8 pin MQS connector system VDO ­ A trademark of the Continental Corporation Viewline Tachometer without LCD Technical Data Measurement Range Sensors: see Table Hall sensor Inductive sensor Blocking oscillator Ignition Terminal 1 Alternator Terminal W amber, dimmable 1, 2, 3, 4, 5, 6, 8 Pulses / Revolution (by Dip Switch) 0, 5 ­ 399, 5 Pulses / Revolution (by PC Software) 50mm 585mm 240° 8, 5 ­ 32 Volt +/- 2, 5% of full scale reading < 175 mA, including Warning LED -20°C to +85°C; plated bezels (chrome) -20°C to +70°C -40°C to +85°C for 48h; plated bezels (chrome) -40°C to +70°C +90°C for 1h Range Transformation time Retention time Range Rel. [. . . ] Humidity ISO 7637-1/2 ISO 7637-3 DIN_EN 61000-4-2 ISO/CD 10605 SAE J 551/15) Sinus 2g; 8-500Hz; duration 16h Noise 4, 2g; 10-1000Hz, duration 8h continuous Single shock Free fall 25g; 6ms; 1Hz 100g; 11ms 1m; 3 times -40°C to +85°C; plated bezels (chrome) -40°C to +70°C 10 seconds 2h +25°C to +55°C 80% to 100% Illumination Adjustment range Installation depth Installation diameter Deflection angle Operating Voltage Accuracy Current consumption Operating temperature Storage temperature Temperature shock Climatic test EMC in conformity with ESD in conformity with Vibration Mechanical shock Chemical resistance against - preservative agent - preservative agent remover - cold cleaner - methylated spirit - interior cleaner - drinks containing caffeine and tannin Nominal position Protection class NL 0 to NL 85 (DIN16257) according to IEC 60529 Front: IP67 (in Nominal position) Rear: IP52 (in Nominal position) yes, 1 minute yes, 1 minute Technische Änderungen vorbehalten Reverse polarity protection Short circuit protection 12/09 Technical details subject to change 2-4 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent, utility model or design. Viewline Tachometer without LCD available Gauges: No. 963715-1 VL Mounting Kit (studs and brackets) 52, 85, 110mm VL Mounting bracket flush mount VL Sealing Ring 52mm flush mount VL Sealing Ring 85mm flush mount VL Sealing Ring 110mm flush mount Bush housing, 8-pin Protective connector cap, 8-pin Hand pliers Tool for hand pliers. Single contacts 0. 14 ­ 0. 22 mm² tin plated Single contacts 0. 5 ­ 0. 75 mm² tin plated Strip 0. 14 ­ 0. 22 mm² tin plated Strip 0. 25 ­ 0. 5 mm² tin plated Strip 0. 5 ­ 0. 75 mm² tin plated Bezels 52mm black flat round triangle A2C53186040 A2C53186027 A2C53186024 black nickel* A2C53293468 A2C53293494 A2C53293545 brush aluminum* A2C53293480 A2C53293495 A2C53293546 chrome A2C53186023 A2C53186029 A2C53186026 gold* A2C53293482 A2C53293496 A2C53293548 white A2C53186022 A2C53186028 A2C53186025 Bezels 85mm black flat round triangle A2C53192911 A2C53192913 A2C53192917 black nickel* A2C53293487 A2C53293541 A2C53293549 brush aluminum* A2C53293488 A2C53293499 A2C53293560 chrome A2C53192910 A2C53192914 A2C53192918 gold* A2C53293490 A2C53293540 A2C53293561 white A2C53192912 A2C53192916 A2C53192920 Bezels 110mm black flat round triangle A2C53210745 A2C53210749 A2C53210763 black nickel* brush aluminum* chrome A2C53210747 A2C53210761 A2C53210765 gold* white A2C53210746 A2C53210764 A2C53192920 * Only on request, no part off standard portfolio Technische Änderungen vorbehalten 12/09 Technical details subject to change 4-4 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. [. . . ] Offenders will be held liable for the payment of damages. [. . . ]