User manual VEO LANCAMERA

[. . . ] Replace the reservoir by pushing it right into its housing. Set the iron thermostat dial between the 2 and 3 dot settings. Press the On/Off button to switch the appliance on. Wait 90 seconds for the appliance to be ready. [. . . ] Depending upon the limescale level of your tap water and upon your weekly ironing load (average time : 2/3 hours), it can be more economical to use distilled water for irons (not for car batteries). In this case, your cartridge should last up to 1 year (depending on the amount of your ironing and on the quantity of steam you ask for). Dip the test strip supplied into tap water for 1 second. Remove, shake it for a few seconds and wait for the resultant colour change (approximately 1 minute). 1 or 1 1/2 mauve squares : you can use tap water. 2 or more mauve squares : we advise you to use distilled water for irons. € Replace the re s e rvoir by pushing it right into its housing. Listen for a click to ensure that the tank is correctly engaged. Never fill the reservoir with hot water Never add products containing alcohol or essences (perfume, eau de Cologne, lavender essence…) to the water. REFILLING WITH WATER WHILST IRONING • You can refill the reservoir during ironing. You do not need to unplug the appliance, and can immediately re-commence ironing. € Select maximum steam output when : the unit is used for the first time, the water tank has been refilled, the anti-scale cartridge has just been changed. NOISE To ensure regular steam output performance, your unit is equipped with a pump which is activated each time the steam trigger is pressed. It is loudest when there is no water in the system e. : the appliance is used for the first time, the water tank is empty, the anti-scale cartridge has just been changed. During normal use the pump has a gentle humming sound. VERTICAL IRONING • Your iron can also be used vertically to steam clothing on hangers or curtains, etc. € Move the iron from top to bottom, keeping the steam button pressed. For best results, the material to be steamed should be taught. € The results vary according to the type of fabric. STORAGE • After ironing, press the On/Off button to switch the appliance off. Unplug the power cable and let your appliance cool. [. . . ] So if necessary, after ironing rub the plate while it is still warm using a good quality cloth (one which does not leave any traces of fluff) or clean it more thoroughly with an iron-cleaning stick. Do not use scouring powders, alkalines (as used with ovens), abrasives or steel wool. Please make sure that the soleplate is kept clean at all times to maintain the iron's ironing efficiency. - Behälter herausziehen und Filterkartusche richtig einsetzen None of the lights are - Power supply problem lit. [. . . ]