User manual VERCIEL PS045H

[. . . ] be damaged. ENGLISH ENG If you ignore the caution message, you may be slightly injured or the product may caution yy Precaution in Installing the Product warning Keep away from heat sources like electrical heaters. - Electrical shock, fire, malfunction or deformation may occur. Do not use the product in damp place such as a bathroom or any place where it is likely to get wet. This may cause a fire or could give an - electric shock. [. . . ] Do not over tighten the screws as this yy may cause damage to the TV and void your warranty. Use the screws and wall mount bracket yy that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the manufacturer’s warranty. 10 cm 10 cm 10 cm 10 cm Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. NOTE Use the screws that are listed on the yy VESA standard screw specifications. The wall mount kit includes an installation yy manual and necessary parts. The length of screws may differ yy depending on the wall mount. For more information, refer to the manual yy supplied with the wall mount bracket. Separate purchase(Wall Mounting Bracket) Model 42/50PA45** 42/50PA49** 50PA65** 400 x 400 M6 4 PSW400B 60PA65** VESA (A x B) Standard screw Number of screws Wall mount bracket 600 x 400 M8 4 PSW600B PSW420BX PSW620BX 16 REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1. 5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control to the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. ENGLISH ENG 1 or Caution Do not mix old and new batteries, as this may damage the remote control. (Only DTV) In country that Digital broadcasting yy regulation isn’t fixed, some DTV function may not work depending on digital broadcasting circumstances. (Only DTV) To display images in the best quality for yy your home environment, select Home Use. Store Demo is suitable for the retail yy environment. If you select Store Demo, the any yy customized settings will switch back to the default settings of Store Demo in 5 minutes. Turning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 4 When the basic settings are complete, press OK. NOTE yy If you do not complete the Initial setting, it will appear whenever the TV turns on. yy Disconnect the power cord from the power outlet when you do not use the TV for a long period of time. 1 Connect the power cord to a power outlet. (POWER) to turn The Initial setting screen appears if you turn the TV on for the first time. NOTE You can also access Factory Reset by yy accessing OPTION in the main menus. 5 To turn the TV off, press (POWER) . 18 MAKING CONNECTIONS MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. ENGLISH ENG NOTE If you record a TV programme on a DVD recorder or VCR, make sure to connect the TV yy signal input cable to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device. The external device connection may differ from the model. [. . . ] Adjust the position setting in the Picture menu. yy Check if the video card resolution and frequency are supported by the product. yy If the frequency is out of range, set to the recommended resolution using the display settings on the external device. The display offset is wrong. Thin lines appear in the background yy Check the video cable connections. Horizontal noises appear or characters blur. [. . . ]