User manual VERCIEL TL 40N

[. . . ] Insert two fresh AAA alkaline batteries into the transmitter, observing the correct polarity (see marking inside battery compartment). from the weather station. WWVB Reception FUNCTION BUTTONS LIGHT/SNOOZE TEMP. SEARCH IN/OUT HEAT/DEW MIN/MAX ALARM SET RCC SEARCH UP C/F DOWN LIGHT ON/OFF AUTO ROTATE IN / OUT Low Battery Temperature/humidity (indoor or outdoor) COLOR WEATHER STATION: FEATURES: • Color animated forecast from changing barometric pressure: sunny, partly sunny, cloudy, rainy and stormy • AUTO or MANUAL option toggles IN / OUT data • IN / OUT temperature (°F / °C) and humidity (%RH) • MIN / MAX temperature readings. • ATOMIC time and date (auto sets) • 12/24-hour time with snooze alarm and alarm icon • Calendar display: month, day, date • Heat index and dew point • Light up display with press of button using battery adapter OR continuous light using AC adapter with ON /OFF option • Low battery icon for weather station and sensor • Sits on desktop or tabletop • Transmits outdoor temperature and humidity • Over 200 FT. [. . . ] Within ferro-concrete rooms (basements, superstructures), the received signal is naturally weakened. In extreme cases, please place the unit close to a window and/ or point its front or back towards the Fort Collins, Colorado, transmitter. During nighttime, the atmospheric disturbances are usually less severe and reception is possible in most cases. A single daily reception is adequate to keep the accuracy deviation below 1 second.   NOTE: When the alarm sounds, it continues for 2 minutes and then shuts off completely. FAHRENHEIT/CELSIUS: Display: Press and release the C/F button once to switch from Fahrenheit to Celsius. MIN/MAX TEMPERATURE/HUMIDTY: VIEW MIN/MAX:  INDOOR: When Indoor Temperature/Humidity is displayed, press the MAX/MIN button to view MAX, MIN and Current Indoor temperature/humidity.  OUTDOOR: When Outdoor Temperature/Humidity is displayed, press the MAX/MIN button to view MAX, MIN and Current Outdoor temperature/humidity. RESET MIN/MAX: Hold the MIN/MAX button for 5 seconds to reset all min/max values. HEAT INDEX AND DEW POINT: NOTE: In case the atomic color weather station is not able to detect the WWVBsignal (disturbances, transmitting distance, etc. ), the time can be manually set (please refer to notes TIME SET). PROGRAM MENU: TIME SET: The SET button moves through the program menu and the UP or DOWN button change the values.  TIME ZONE: Hold the SET button and the Time Zone will flash. Press and release the UP or DOWN button to select the Time Zone. This feature allows the station to alternately display indoor temperature/humidity and outdoor temperature/humidity every 10 seconds. The word AUTO will appear in the lower right display when this feature is active. Press and release the AUTO button to turn the feature off again. BACKLIGHT: A/C adapter: The backlight can be on continuously when operation with the 6-volt a/c adapter.  OFF: Hold the LIGHT ON/OFF button for 5 seconds to turn off the backlight, to sleep.  ON: Hold the LIGHT ON/OFF button again to turn the backlight on. Battery power: The backlight will light for 8 seconds when operating on batteries only. LOW BATTERY: It is recommended to replace the batteries in all units every 12 months to ensure optimum accuracy of this unit. A low battery icon will display next to the outdoor temperature when the transmitter batteries are low and next to the indoor temperature then the batteries in the weather station are low. MAINTENANCE Do not expose the display to extreme temperatures, vibration or shock.  The product is not to be used for medical purpose or for public information, but is determined for home use only. [. . . ]  WALL MOUNT Install one mounting screw (not included) into a wall within transmission range of the weather station, leaving approximately 3/16 of an inch (5mm) extended from the wall. Place the transmitter onto the screw, using the hanging hole on the backside. Gently pull the transmitter down to lock the screw into place. repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference. . This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. [. . . ]