User manual VESTAX CDX-15

[. . . ] Cet appareil numérique de la Classe B respecte toutesles exigences du Réglement sur le matérier brouilleur du Canada. IMPORTANT This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fix new fuse which should be a BS1362 5A. If the fitted plug is not suitable for your sockel outlets, It should be cut off and an appropriate plug fitted in its place. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A. HOW TO CONNECT A PLUG The wires in the mains lead are coloured in accordance with the following code: BLUE-"NEUTRAL"("N") BROWN-"LIVE"(L") 1. The BLUE wire must be connected to the terminal which is marked with the letter "N" or coloured BLACK. [. . . ] Refer all servicing to qualified sersonnel. Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damage. If liquid has been spilled or objects have fallen into the product. If the product has been exposed to rain or water. If the product dose not operate normally by following the operating instructions. Adjust only those controls that are coverd by the operating instructions as an improper adjustment of other, controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. If the product has been dropped or cabinet has been damaged. When the product exhibits a distinct change in perfromance-this indicates need for service. 19. Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characterristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards. Safety Check-Upon completion of any service or repairs to product, ask the service technician to perfrom sefety checks to determine that the product is in proper operating condition. Carts and Stands-The appliance should be used only with a cart stand that is recommended by manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. FEATURES The combination of a 10 second buffer memory and the shockproof mechanism support system prevents the CDX-15 from skipping caused by physical and acoustic vibration. This feature enables the CDX-15 to be used in any situation, such as professional, club or mobile application. CD mixing can be done without an external mixer by using the built-in crossfader. The CD signal can be monitored through headphones without reproduction from the Master output, by using the monitor select switch. 20 Last stop position can be recalled instantly for replay with the Cue button. +/-10% pitch control fader is provided for quick and accurate beat matching. Dual function joystick is provided for easy cueing and pitch bending. Single / All repeat switch enables repeat play of either one song or the whole CD. Top loading type dual CD Player system features combined high performance CD Players and controllers. BEFORE USE Notes on the Compact Disc (CD) The surface which is glossy like a ralnbow is the front side of the CD, and the surface where the label information is printed is the back side. [. . . ] This prevents the laser pick up from wearing out. The CDX-15 starts playing back from the beginning of the track when PLAY BUTTON is pressed once again. STANDBY MODE In case the player is kept in PAUSE mode for over ten minutes, the CDX-15 stops spinning automatically and is set to STANDBY MODE in order to protect the CD mechanism from wearing out. STANDBY MODE is cancelled if any of the following is done. [7] Open the top door and pull out the disc. [1] Start to play back by pressing PLAY/PAUSE button. [. . . ]