User manual VESTAX DWG-X1

[. . . ] Follow Instructions-All operating and use instructions should be followed. Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] Protective Attachment Plug-The appliance is equipped with an attachment plug having overload protection. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the original plug. Lightning-For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing-Do not attempt to service product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified personnel. Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damage. If liquid has been spilled or objects have fallen into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other, controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. [. . . ] ( ) DOWN MODE " " Functions similarly to the LFO MODE but the range of modulation is limited to lower frequencies. You will need to make adjustments to match the position of both input level and filter with the input level volume and the GATE CONTROL. The LED will light when the effect is active. MODE ENV automatically DEPTH SPEED automatically adjust SPEED CONTROL THRESHOLD adjust GATE CONTROL SWING DIRECTION LOW LOW LOW HI HI HI MANUAL MODE ( ) PEDAL MODE "REMOTE" The foot pedal (option) allows you to control the effect with a simple on/off footswitch. ( ) MANUAL MODE "MANUAL" Control the effect manually with MANUAL CONTROL. GATE CONTROL The control to set a threshold level when AUTO MODE is active. SPEED CONTROL The control to adjust the speed of the filter movement LFO/DOWN INDICATOR LED will light when LFO/DOWN is active. [. . . ]