User manual VESTAX PDT-5000

[. . . ] The product should be location or position does not interfere E. The product has been dropped, or the enclosure damaged. Do not attempt to service the product beyond that described in with its proper ventilation. The product should be located away from heat sources such as be referred to qualified service personnel. [. . . ] The new option meter allows DJs to monitor the cue signal visually. The tempo can be matched by eyes as well as ears. Three phono and 6 line inputs are provided to meet the new mixing style with various input source. User replaceable 60 m/m input faders and 45 m/m cross fader make "on sight service" very easy. Optional input rotary volume can be replaced with the fader for "House" application. Line 4 input jack (RCA) is located on the top panel. This allows DJs to use hand carried DAT or MD player mixing with installed equipment. TOP PANEL PROGRAM INPUT SECTION PRO FESSIONAL MIXING CONTROLLER PDT-5000 MASTER +8 +8 +5 +3 +1 0 -1 -3 -5 -7 -10 -15 POWER LINE 4 IN INPUT L R PHONO 1 PGM 1 INPUT LINE 2 PHONO 2 SUB INPUT LINE 4 PHONO 3 PGM 2 LINE 6 CUE +5 +3 MIC TRIM LINE 1 LINE 3 LINE 5 +1 0 MASTER SECTION TRIM TRIM -1 -3 MIC-1 MIC-1 MIC-2 MIN MAX MIN MAX MIN MAX -5 -7 -10 -15 POWER MICROPHONE AND SUB INPUT SECTION BAL BAL BAL MIN MAX L R L R L R MIC-2 EQ HI EQ HI EQ HI L R EFFECT SEND MIN MAX -16dB +16dB -16dB +16dB -16dB +16dB EQ HI MID MID MID MIN MAX RETURN -16dB +16dB -12dB +12dB -12dB +12dB -12dB +12dB LOW LOW LOW LOW MIN MAX CUE -16dB +16dB -16dB +16dB -16dB +16dB -16dB +16dB EFFECT OFF POST EFFECT PRE OFF POST EFFECT PRE OFF POST EFFECT PRE OFF POST OFF ON MASTER BAL CUE OFF ON CUE OFF SIGNAL ON CUE OFF SIGNAL ON CUE OFF SIGNAL ON L R LEVEL 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 MIN MAX MONITOR SPLIT CUE ON OFF PHONES LEVEL MIN MAX PHONES IN PGM1 ISOLATOR PGM2 ISOLATOR LOW MID HI 1 2 LOW MID HI ISOLATOR SECTION PHONES IN PROGRAM INPUT SECTION PGM 1 INPUT PHONO 1 LINE 2 PROGRAM INPUT SECTION 1. INPUT SELECTOR Used to select input (2 line or 1 phono) to be sent to each PGM channel. TRIM CONTROL Adjusts the Input level of each channel. adjust TRIM so that the INPUT LEVEL METER shows about 0dB. BALANCE CONTROL Adjusts the stereo balance for each PGM channel. LINE INPUT JACK(LINE4) Input connectors for line level equipment such as CD players, tape decks , DATs, or MDs etc. MIC INPUT JACK(MIC1, 2) Input jacks of mic1, mic2. MIC LEVEL Adjusts the input level from all of the microphone inputs. MIC EQUALIZER(HI, LOW) Adjusts the HI and LOW frequencies for all of the microphone input. EFFECT SWITCH MASTER CUE Used when sending signal to the external effect +8 +8 processor connected to the effect SEND/RETURN. CUE SWITCH +3 +3 Used to send the signal from the mic channel to the +1 +1 monitor section for headphone monitoring. 0 0 -1 -1 -3 -5 -7 -10 -15 POWER 9 L R MIC 10 MIC-1 MIC-1 MIC-2 11 MIN MAX MIC-2 MASTER SECTION MIN MAX -3 -5 -7 -10 -15 POWER 16 EQ HI 12 -16dB +16dB LOW -16dB +16dB EFFECT 13 OFF POST CUE 14 OFF ON 15. MASTER OUT LEVEL METER The LED level meters indicate the signal level of the line out. CUE LEVEL METER The LED level meters indicate the signal level of PGM input selected by CUE SWITCH. EFFECT SEND LEVEL Used to adjust the output level from EFFECT SEND JACK. The signal is selected by the effect switch. [. . . ] 27, LOW SWITCH Allows cutting off the sound of the bass range. Sound volume will be cut when the switch is set downward. When the switch is put back, the output volume return to normal. Can be utilized for creating the effects of an acapella. ISOLATOR SECTION PGM1 ISOLATOR LOW MID HI 27 26 25 REAR PANEL 28 30 31 POWER ON OFF AC230V 50 / 60Hz 16W PDT-5000 OUTPUT MASTER OUT 1 MADE IN CHINA SERIAL NO. EFFECT SEND PGM 2 R L R LINE 6 SUB L R PGM 1 LINE 2 L R L R LINE 3 L 34 LINE 1 LINE 5 R MASTER OUT 2 L PHONO 3 RETURN GND GND PHONO 2 PHONO 1 33 35 29 32 REAR PANEL 28. [. . . ]