User manual VESTAX PETIT POP

[. . . ] 2. The BROWN wire must be connected to the terminal which is marked with the letter "L" or coloured RED. 3. Do not connect either wires to the earth terminal in the plug which is marked by the letter "E" or by the safely earth symbol or coloured green or greenand-yellow. Betore replacing the plug cover, make cenain that the cord grip is clamped over the sheath of the lead-not simply over the two wires. The severed plug must be destroyed to avoid a possible shock hazard it be inserted into a 13A socket elsewhere. CLASS 1 LASEN PNOOCUT LUOKAN 1 LASENLAITE KLASS 1 LASENAPPANAT READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. [. . . ] If this should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Power-Cord Protection-Power supply cords should be routed so that they are not likely to be walked on or pinched by intems placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. Protective Attachment Plug-The appliance is equipped with an attachment plug having overload protection. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug. Lightning-For added protection for this product during lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Top loading type dual CD Player system features combined high performance CD Players and controllers. BEFORE USE Notes on the Compact Disc (CD) The surface which is glossy like a ralnbow is the front side of the CD, and the surface where the label information is printed is the back side. Unlike conventional analog disk turntables, the CD player reads information from the disc by applying laser beam, in place of a stylus, on the front surface. Consequently, the performance of CD discs will not degrade after repeated use like conventional analog disks. Handle the CD disc carefully so as not to damage the front surface. To maintain the CD disc flawless, do not place it in the following locations. In a place subject to direct sunlight or near a heat source such as a room heater. In a place subject to excessive moisture or dirt. In a place which may be subject to rain, for example near a window. Keep the disc surface always clean. UP to about 6 billion items of data are recorded on the Cd disc surface. When cleaning the disc surface, always use a specialized CD cleaner product and wipe in the direction as shown below. Wipe in the radial direction. Do not wipe in the circumference direction. Never use record cleaner designed for conventional analog disks, for this may degrade the CD disc surface. Always store disc properly in the case. FUNCTIONS CUE BUTTON The last pause position is always memorised and can be called up by pressing cue button. This function is useful for instant cueing, the same position can be recalled and played back with a single quick action. Memory of the cue point will be lost or reset when any of the following operations are done. [2]The CD is paused and played another position. This position will then be memorised as the new cue point. PLAY/PAUSE BUTTON This button is used to start and pause the CD. [. . . ] Then pauses at the beginning of the first track. [3] Press PLAY/PAUSE button. Starts playback from the first track immediately. Remaining time of the playing track will be shown on the digital display in minutes, seconds and frames. [4] Press NEXT button to skip to the next track. Stop playing current track and starts playing back from the beginning of next track. [5] Press PLAY/PAUSE button to stop playback. Press PLAY/PAUSE button again to re-start playback. [6] Press STOP button when the CD is not played for a while. [. . . ]