User manual VESTAX PMC-05PROIII-

[. . . ] Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placting the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack 2 unless proper ventilation is provided or the manufacturer's instructions have been adhered to. [. . . ] If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. Grounding or Polarization-This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This piug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If this should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Power-Cord Protection-Power supply cords should be routed so that they are not likely to be walked on or pinched by intems placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. Protective Attachment Plug-The appliance is equipped with an attachment plug having overload protection. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug. Carts and Stands-The appliance should be used only with a cart stand that is recommended by manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. FEATURES 3 NOTES Before detaching or attaching the headshell, be sure to turn the power of the amplifier or mixer to the OFF position. Detaching or attaching of the headshell with the volume control up may cause damage to the speakers. Do not turn on the turntable with the platter removed. When playback is finished, use the tonearm clamp to secure the tonearm in rest position. If the unit is not to be used for some time, the stylus protector should be used as well. The headshell terminals must remain clean to avoid "hum" noise or intermittent sound. Use a soft dry cloth to remove dust or dirt. Dust and dirt must be removed from stylus tip and record surface. [. . . ] Dust and dirt must be removed from stylus tip and record surface. Failure to do so may cause undue wear of the record or stylus, and deterioration of tone quality. When transporting the unit it is suggested that the original packing materials are used and handled with care. If packing materials are not available, first remove the platter and wrap it separately. [. . . ]