User manual VESTAX PMC-07PRO

[. . . ] This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. Power sources-This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. [. . . ] When the product exhibits a distinct change in perfromance-this indicates need for service. 16. Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characterristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards. Safety Check-Upon completion of any service or repairs to product, ask the service technician to perfrom sefety checks to determine that the product is in proper operating condition. Carts and Stands-The appliance should be used only with a cart stand that is recommended by manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. FEATURES The world's first quadraphonic (4channel) output allows DJs to expand their performance to 3D level. Q-stick controls the dimension of each input source amongst four speakers. The beats and scratches fly around the room front, back, left and right. Effect send volume controls are provided to each program. Effect return can be assigned to each program or the master enabling various flying effects. Switches PGM1 and 2 simultaneously. i PROGRAM REVERSE SWITCH o MASTER TRIM VOLUME Trim adjustment for master level fader. !0 MASTER FADER Adjusts overall master output level. !1 SESSION MIX VOLUME Adjusts the input level of SESSION IN JACKS (#5, #6). !2 MONITOR SELECT SWITCH This allows monitoring of the MASTER OUT (#1, #2) or the CF MONITOR (@2). !3 Q-STICK ON/OFF SWITCH When this switch is on, the Q-stick functions. When this switch is off, the Q-stick does not function. !4 Q-STICK(Quadraphonic Stick) Controls the volume sent to the four speakers or zones. 5 FRONT PANEL SECTION 23 PGM 1 I. F. REV. NORMAL REVERSE 24 CROSS FADER C. F. PHONES 2 NORMAL REVERSE 27 PHONES 1 PMC-07ProISP PROFESSIONAL QUADRAPHONIC DJ MIXER 28 CURVE CURVE CURVE 25 @3 IF REVERSE SWITCH 26 25 @6 CF CURVE SELECT VOLUME Determines the slope characteristics of the crossfader's curve from steep to gradual. 1 2 3 Reverses the action of the inputfader by making the zero point top instead of bottom. Reverse mode is indicated in LED section. @4 CF REVERSE SWITCH Reverses the action of the crossfader by switching PGM1 and 2. Reverse mode is indicated in LED section. L E V E L @5 IF CURVE SELECT VOLUME Adjusts the input fader curve for steep or gentle slope. POSITION POSITION POSITION Rotate clockwise this volume, C. F curve changes like a chart ( 1 2 3) fig. B CROSS FADER CURVE 3 L E V E L @7 MINI HEADPHONE JACK [ 2 1 3. 5 ] Connect headphones with 1/8" mini headphone plug. @8 HEADPHONE JACK [ 6. 3 ] Connect headphones with a standard 1/4" stereo plug. POSITION Rotate clockwise this volume, I. F curve changes like a chart ( 1 2 3) f i g . A INPUT FADER CURVE 6 REAR PANEL SECTION 31 33 35 37 WARNING;SHOCK HAZARD-DO NOT OPEN. AVIS;RISQUE DE CHOC ELELCTRIQUE -NE PAS OUVRIR. 39 CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN MASTER SERIAL NO. FRONT PROFESSIONAL QUADRAPHONIC DJ MIXER SUB MASTER SESSION IN PMC-07ProISP AUX SEND PHONO IN 1 R L MADE IN JAPAN POWER REAR 2 R L GND AC 12V R L R L R L AUX RTN 29 30 @9 POWER SWITCH 32 34 36 38 40 #3 SUB MASTER OUT JACK-FRONT [1/4 inch PHONE JACK unbalance] Sub output jack for front left and front right speaker zone. Unbalanced connectors at -4dBm for monitoring etc. Power for mixer, on status indicated by POWER LED(!6) on top panel; should be turned on after all connections are made. Note As a general rule for protection, the amp should be turned on last and turned off first. #4 SUB MASTER OUT JACK-REAR [1/4 inch PHONE JACK unbalance] Sub output jack for rear left and rear right speaker zone. Unbalanced connectors at -4dBm for monitoring etc. #0 AC POWER JACK Connect AC ADAPTOR (AC-12A) in here before switching on power. #5 SESSION IN JACK-FRONT [1/4 inch PHONE JACK] Allows front 1/4 inch chain connection with multiple PMC-07ProISP mixers. Note UNAUTHORIZED POWER ADAPTORS MAY CAUSE HARM TO UNIT. #6 SESSION IN JACK-REAR [ 1/4 inch PHONE JACK ] Allows rear 1/4 inch chain connection with multiple PMC-07ProISP mixers. #1 MASTER OUT JACK-FRONT [1/4 inch TRS balanced] Main output jacks for front left and front right speaker zones. [. . . ] t Position the fader unit carefully and secure with screws. Driver Insert the multi-cable connector HOW TO CHANGE THE Q-STICK UNIT q Remove the three screws on the Q-stick panel. w Remove the Q-stick unit from position in mixer. e Carefully remove the multi-cable connector from Q-stick unit. r Attach multi-cable connector to new Q-stick unit. [. . . ]