User manual VESTAX PMC-280

[. . . ] There are, however, some installation and operation precautions which you should be particularly aware of. operating 9. This product should never be placed near or over a radiator or heat register. should not be placed in a built-in installation such as a bookcase or rack unless proper 2. Retain instructions-The safety and operating ventilation is provided or the manufacturer's instructions should be retained for future instructions have been adhered to. 1. Read instructions-All the safety and instructions should be read before the reference. 3. Heed Warnings-Allwarnings on the appliance and in the operating instructions should be adhered to. 10. Power sources-This product should be operated only from the type of power source indicated on the marking label. [. . . ] 18. Carts and Stands-The appliance should be used only with a cart stand that is recommended by manufacturer. 19. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. FEATURES OEffects are assignable separately to the master section and A & B side of the crossfader. Easily selectable with the effect assign switch. OOriginal algorithm developed so that each etfect parameter is adjustable with simple operation. On High-grade 24biV96kHz Digital Sound latency. Processor (DSP) has been applied to the PMC-280 for better sound quality and less OTne TAP button is used to set the delay time and LFO rate, simply by tapping the button. The inputted tempo can be switched to 1/4, 1/2, 3/4 and double of the original tempo instantly with the beat select switches. -16- ·, . . . , ·, . . . u, q, , ` , s, ] · , d l, N· · TIME 's EMPO Xl TIM<§ TEMPO X4 m:n (0%) depth/sweep vR DRY center (50%) volume position DRY:EFFECT=1:1 m:n (0%) O --, ` , ·u. . . , , A , q , [ d, E · · The average tempO set by pushing the TAP button more than 2 tirnes becomes the LFC)cycle tempo. · ¡ Beat select button m1/4" 'sEMPO=(A)·~ "1/2" TEMPO=(A)·~ "3/4" TEMPO=(A)·~ "1" 'sEMPO=(A)·~ "2" TEMPO=(A)·~ 1/4 1/2 3/4 1 2 sweep VR depthm DRY center (50%) volume position max (100%) numerous delay sounds to the 's:M<§ TEMPO Xl T:ME TEMPO X4 m:n (0%) center (50%) volume position min (0%) center (50%) volume position max (100%) XHOLD. The echo repeating sound will repeat play in lhe rhythm ol the TEMPO when the depth/sweep volume is set to HOLD. The TEMPO of the repeating sound can be set with rate/time volume and beat select button. R B EVERB This effect adds a reverberant sound to the origina!me ratem VR ·a reverb hall min (0%) depthm sweep VR DRY center (50%) volume pOsition min (0%) center (50%) vo:ume position max (100%) -20·] rate/time VR ' !ME s TIME TEMPO Xl 's :ME TEMPO X4 , , ·, Z ·, " · -- , center (50%) volume position depth/sweep VR DRY min (0%) center (50%) vo!ume position max (100%) X Restarting the beat select button. LOW LFO This leature restarts the LFO cycle to gain lhe same LFO effect when adjusting the depth/sweep volume and mod. freq. M:D mod. freq. HI m:n (0%) depth/sweep VR DRY center (50%) volume position N· W ç volume position min (0%) depthm sweep VR DRY center (50%) volume position max (100%) center (50%) volume position ·]21·] DRY:EFFECT=1:1 max (100%) DRY:EFFECT=1:1 max (100%) max (100%) DN·¡ EFFECT=1:1 center (50%) volume position ·] 22·] max (100%) rateAime VR m!n (0%) center (50%) voiume pOsition max (100%) sweep VR depthm , W m!n (0%) oenter (50%) vo:ume pOsition max (100%) @eaNo PASS FTLTER (MANUAL) The Q changes with the rate/time volume. [. . . ] cable C Poslion the fader unk carefully and secure wnh D screws. fig. B · HOW TO REPLACEttH[CF' UNI's PCV" ¦ VY ``CF·] H s Please see fig. C for rep:acement of the fader. [. . . ]