User manual VESTAX SL-201MKII

[. . . ] Any mounting of the appliance should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. Power sources-This product should be operated only from the type of power source indicated on the marking label. [. . . ] If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. Lightning-For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing-Do not attempt to service product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified personnel. 2 15. Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. If liquid has been spilled or objects have fallen into the product. EQ ( HI, LOW ) Adjusts the HI and LOW frequencies for each PGM channel. INPUT LEVEL METER The LED level meters indicate the input signal level of each PGM channel. CROSS FADER When the input level of PGM1 and PGM2 are Properly set, PGM1 will be heard with the cross fader set to the left side. PGM2 will be heard with the cross fader set to the right side. When the cross fader is set in the center, both grograms will be heard. This is a detachable fader for the ease of replacement with "CF-PCV" when it is worn out. Use this jack to connect the head phones. Head phones from 8 ohm to 600 ohm can be used. 150 ohm is recommended 9 MONITOR SELECT FADER When the monitor levels of PGM1 and PGM2 are properly set, PGM1 will be monitored in the headphone with the fader set to the left side and PGM2 will be monitored in the head phone with the fader set to the rigth side. When the fader is set in the center, both programs will be monitored in the head phone. 10 HEAD PHONE LEVEL Adjusts the head phone output level. 11 MASTER LEVEL VOLUME Adjusts the signal level output from the LINE OUT jack on the rear panel. [. . . ] 11 MASTER LEVEL VOLUME Adjusts the signal level output from the LINE OUT jack on the rear panel. 12 MASTER BALANCE VOLUME Adjusts the signal balance of the left and right side of the outputs from the LINE OUT jack on the rear panel. 13 MIC LEVEL Adjusts the input level from all microphone inputs. 4 How to change the fader unit. HOW TO REMOVE THE TOP PANEL 1 Remove each fader knobs and 4screws which Driver fix the top panel. 2 Remove the top panel. Top panel Main panel Driver HOW TO CHANGE THE FADER UNIT 1 Remove the screws on the fader panel. [. . . ]